Abstract:In this work, a novel amphoteric copolymer named Poly(sodium p-styrenesulfonate– co -acrylic acid- co -diallyldimethylammonium chloride) (P(SS- co -AA- co -DMDAAC)) was synthesized via free radical polymerization. Afterwards, P(SS- co -AA- co -DMDAAC) was explored for use as a dispersant in coal water slurry (CWS) preparation. The structure of P(SS- co -AA- co -DMDAAC) was verified by Fourier transform infrared spectroscopy and nuclear magnetic resonance. The synthetic conditions were optimized as the feed ratio of AA to SS was 1 : 1 (for Yulin coal) or 1.5 : 1 (for Yili coal), and DMDAAC dosage was 4.0 wt% (for Yulin coal) and 6.0 wt% (for Yili coal) toward total monomers. The performances of P(SS- co -AA- co -DMDAAC) as a dispersant for CWS were evaluated by various technologies, such as apparent viscosity, zeta potential, static stability and contact angle measurements. The results revealed that the optimized dosage of P(SS- co -AA- co -DMDAAC) in CWS preparation was 0.3 and 0.4 wt% for Yulin coal and Yili coal respectively. In this optimum condition, CWS prepared using P(SS- co -AA- co -DMDAAC) as dispersant showed a typical shear thinning behaviour and excellent stability, which are desired in industries. The rheological models also confirmed the pseudo-plastic characteristics of CWS. Finally, compared with the widely used anionic dispersant naphthalene sulphonate formaldehyde condensate (NSF) and poly(sodium p-styrenesulfonate) (PSS), P(SS- co -AA- co -DMDAAC) developed in this work exhibited better slurry making performance. The introduction of cationic functional groups promoted the adsorption of the dispersant, which further enhanced the electrostatic repulsion and steric hindrance among coal particles. Accordingly, the viscosity of CWS decreased and static stability enhanced.

Synthesis and Application Performance of a Dispersant for Ceramic Slurry

Application Performance of Lignin-Modified Amino-Sulfonic Acid-Based Dispersant on the Ceramic Slurry

Study on the Performance and Compatibility of Lignin-based Dispersant for Ceramic Slurry

THE EFFECT OF MODIFIED LIGNOSULFONATE ON PROPERTY OF CERAMIC SLURRY

Effect of Relative Molecular Mass of Amino-Sulfonic Acid-Based Dispersants on Performances of Ceramic Slurry

Evaluation of Utilization Performance of Modified Wheat Straw Alkali Lignin As a Dispersant of Coal-Water Slurry

Application of High-Efficiency Bamboo Lignin-Based Dispersant to Coal Phenol-Water Slurry

High-performance dispersant of coal–water slurry synthesized from wheat straw alkali lignin

Sulfonation Of Alkali Lignin And Its Potential Use In Dispersant For Cement

Experimental study on influences of dispersant on dispersion and stability of CMP slurry with silica

Using Sulfobutylated and Sulfomethylated Lignin as Dispersant for Kaolin Suspension

EFFECTS OF EFFICIENT DISPERSANTS OF LIGNIN SERIES ON THE PREPARATION FEATURES OF COAL WATER SLURRY

EFFECT OF THE MODIFIED SODIUM LIGNOSULPHONATE DISPERSANT ON THE PERFORMANCE OF COAL-WATER SLURRY FROM SHENHUA COAL

Development of Sodium Lignosulfonate Dispersant and Its Utilization in Pesticide

Modified Lignosulfonate Affected to Slurry Performance of Coal Water Mixture

Synthesis of a novel amphoteric copolymer and its application as a dispersant for coal water slurry preparation

Synthesis of Lignosulfonate-Based Dispersants for Application in Concrete Formulations

Adsorption and Dispersion Mechanisms of Aminosulfonic Acid-Based Ceramic Dispersants at Black Mud/Water Interface

Efficient Composite Dispersants for High Solid Content, Low Viscosity Nano-Zirconia Slurries: An Experimental and Molecular Dynamics Simulation Study

Innovative Insight for Sodium Hexametaphosphate on the Dispersion of Micro-Sized Lanthanum-Cerium-based Slurry

Study on dispersion and stability for slurry of γ-Al2O3 nanoparticles