Abstract:An instrument has been developed for continuous monitoring of 220Rn. The method of data analysis is based on delayed coincidences between 220Rn and 216Po. The instrument basically consists of a scaler equipped with a photomultiplier tube (PMT) to which a scintillation cell (SC) of the flow through type is optically coupled. The scaler is equipped with a pulse output (P/O) port which provides a TTL pulse, +5 V in amplitude and 5 to 10 μs duration for each nuclear event recorded by the SC and its associated electronic circuitry. The P/O port is connected to a 32 bit counter/timer unit operating at 1 MHz which records and stores the time of arrival of pulses. For laboratory use, the counter/timer is connected to the serial port of a laptop PC. However, for field applications, where space and weight pose severe practical limitations, the PC is substituted by an expanded counter/timer unit which incorporates a muprocessor for data analysis, a LCD for data display, and a keypad to key in function instructions. Furthermore, some additional hardware permits the measurement of 220Rn flux density, J(220Rn), from soils and other materials. Because total α-particle count, as well as delayed (α - α) coincidence rates are recorded in two separate channels, the method permits the measurement of 222Rn in addition to 220Rn. The method is particularly useful for low concentration levels. The sensitivity of the method primarily depends on the volume of the SC. For a low volume SC (∼0.16 l), a sensitivity of 0.2 h−1/Bq m−3 for 220Rn and 1.4 h−1/Bq m−3 for 222Rn are readily attainable. For a large volume (1.5 l) SC (external PMT used), the sensitivity for 220Rn is ≥ 1.5 h−1/Bq m−3, depending on the SC design and the operating sampling flowrate. (Note: h−1 stands for counts per hour). The above instrument has been used extensively at the National Radon/Thoron Test Facility (NRTTF) of the Elliot Lake Laboratory for routine monitoring of 220Rn levels since 1992. It has also been used for outdoor and indoor 220Rn measurements, as well as for the determination of J(220Rn) from earthen materials and the like.

Development of A 220 Rn Chamber with Inner Sources.

Improved Apparatus for Inline Measurement of Residence Time Distribution of Thermomechanically Complex Systems

Characteristic and Performance of A Simple Thoron Chamber

Development and Stability Verification of a Measuring Installation of Saturation Liquid Density

Development of an Automatic Calibration Device for High-Accuracy Low Temperature Thermometers

Development of High Accuracy PVT Measurement System for Refrigerants

A Rn-220 source for the calibration of low-background experiments

An instrument for continuous measurement of 220Rn (and 222Rn) using delayed coincidences between 220Rn and 216Po

Comparative Study of the Measurement of Thoron Gas

Equipment for Testing Measuring Devices at a Low-Level Radon Activity Concentration

Reference device for calibration of radon exhalation rate measuring instruments and its performance

Integrating measurements of radon and thoron and their deposition fractions in the respiratory tract

An Instrument for Measuring Equilibrium-Equivalent 222rn and 220rn Concentrations with Etched Track Detectors.

A Theoretical Study on Accurate Measurements of Thoron with Airflow-Through Scintillation Cell Method

Two new 222Rn emanation sources – a comparison study

Calibration Test of Reverberation Chamber

Some Problems on the Measurement of 222rn Concentrations by Passive Cup Method.

Characterization of a $^{220}$Rn source for low-energy electronic recoil calibration of the XENONnT detector

Study on Accurate Measurement of ~(220)Rn Activity Concentration by Using RAD7 Radon Monitor

Design and Calibration of Reverberation Chamber

An Improved Passive CR-39-Based Direct 222Rn/220Rn Progeny Detector