Abstract:The reference is an important part in the accelerometer system. With the development of science and technology, the request of the performance of accelerometers is increasingly higher and the precision of reference directly affects the performance of accelerometers. Therefore, a reference voltage applicable to accelerometers is presented based on the analysis of basic principles of conventional bandgap reference (BGR) in this paper. A high-order curvature compensation technique, which uses a temperature dependent resistor ratio generated by a high poly resistor and a nwell resistor, effectively serves to reduce temperature coefficient of proposed reference voltage circuit and to a large extent improve its performance. To achieve a high power supply rejection ratio (PSRR) over a broad frequency range, a pre-regulator is introduced to remain the supply voltage of the core circuit of BGR relatively independent of the global supply voltage. The proposed circuitry is designed in standard 2.0μm CMOS process. The simulated result shows that the average temperature coefficient is less than 2ppm/°C in the temperature range from -40 to 120°C. The improvement on temperature coefficient (TC) is about 10 times reduction compared to the conventional approach. And the PSR at DC frequency and 1kHz achieves -107 and -71dB respectively at 9.0V supply voltage.

Reference Voltage Based on Bandgap Reference for Accelerometers

A High Precision Circuit of Bandgap Voltage Reference

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A bandgap reference circuit with the nominal reference voltage adjusted accurately

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A bandgap reference circuit with nominal value adjustable

A Curvature-Compensated, High Power Supply Rejection CMOS Bandgap Reference for MEMS Micro-Accelerometer

A low noise and low temperature coefficient CMOS bandgap reference for MEMS micro-accelerometer

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A High-Order Curvature-Compensated Bandgap Voltage Reference For Micro-Gyroscope

A 0.18μm CMOS band-gap voltage reference

A Bandgap Reference with Temperature Compensation and Its Output Buffer

A 1.2-V 2.18-ppm/°C curvature-compensated CMOS bandgap reference

Design of an Offset Voltage Compensation Ratio-Capacitance Bandgap Voltage Reference

A Bandgap Reference with Temperature Compensation and Improved PSRR

A 3.95 ppm/°C 7.5 μW Second-Order Curvature Compensated Bandgap Reference in 0.11 μm CMOS

Design of a bandgap reference voltage source with low temperature coefficient and high precision

A Low Voltage High Precision CMOS Bandgap Reference

A High-Precision Bandgap Reference with Chopper Stabilization and V-Curve Compensation Technique

A2.1-ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation.

Curvature Compensated CMOS Bandgap Voltage Reference for High Precision Application