Abstract:Fluid catalytic cracking (FCC) is the workhorse of modern crude oil refinery. Its regenerator plays a critical role in optimizing the overall profitability by efficiently restoring the catalyst activity and enhancing the heat balance in the riser reactor. Improvement in the device metallurgy and process operations have enabled industrial regenerators to operate at high temperatures with a better coke burning rate and longer operating cycle. Today, the carbon content of regenerated catalyst has drastically reduced to less than 0.1 wt.%. However, the unit is still plagued with operational complexities and insufficient understanding of the underlying dynamic, multiscale intricacies. Recent process-intensification strategies provide insights into regenerator performance improvement potentials. In this review, the importance of the uniform distribution of spent catalysts through structural modification and operational manipulations of the catalyst distributor is discussed. The knowledge of the role of baffles in enhancing excellent gas–solid interaction has been increasing, but skepticism due to its complex hydrodynamic effects on gas–solid flows fends off operators from its application, a critical evaluation of its implication in the regenerators is covered. The understanding of the contribution of air/steam distributor design and feed gas injection techniques for even contact with spent catalyst leading to the improvement in FCC performance is also investigated. The reliability of FCC components is equally a big concern, as unplanned shutdown and enormous economic losses are being witnessed due to device failure. To this end, mitigation approaches to damaging afterburn and high-temperature erosion problems with respect to process control and geometric adjustment in the bed, freeboard, cyclone separators and collection ducts are explored. Emission limits for fluid catalytic cracking unit (FCCU) and products are consistently ratcheting downward; the commingled turnkey solutions to reducing pollutants generation are also reviewed.

Process of fluidized bed integrated with FCC

Separation of Catalytic Powder from FCC Slurry Oil by Solvent Extraction and Filtration

A NEW INTEGRATION PROCESS OF RESIDUE HYDROTREATING COMBINED WITH CATALYTIC CRACKING

Developmet and application of fcc feed hydrotreating technology in ripp

Research on the aromatics enrichment and solid particles removal during slurry oil fluidized thermal conversion

New breakthrough of heavy oil upgrading technology - Integration processes of VRFCC/RMC for production of high value products and steam cracking feed

DEVELOPMENT AND COMMERCIAL APPLICATION OF KEY TECHNOLOGY FOR EFFICIENT CONVERSION OF HEAVY OIL

Study on Application of Bi-Directional Combination Technology Integrating Residue Hydrotreating with Catalytic Cracking Ricp

Integration of CGO hydrotreatment with FCC

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Integrated Hybrid Modelling and Surrogate Model-Based Operation Optimization of Fluid Catalytic Cracking Process

Advancements of the Fluidized Bed Fenton (FBF) Technology for wastewater treatment: Mechanism, mass and heat transfer

Additional Feedstock for Fluid Catalytic Cracking Unit

On applying advanced process control for FCCU in a petroleum refinery

Suspended-bed hydrocracking process——a deep high-efficiency conversion process in rapid development for processing low-quality heavy oils

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling

State-of-the-Art Review of Fluid Catalytic Cracking (FCC) Catalyst Regeneration Intensification Technologies

Hydrophobic Flocculation Flotation for Beneficiating Fine Coal and Minerals

Customized Atmospheric Catalytic Hydropyrolysis of Biomass to High-Quality Bio-Oil Suitable for Coprocessing in Refining Units

Combined Process of Hydrocracking and Hydrofining of Coal Tar

Deep Conversion of Venezuela Heavy Oil via Integrated Cracking and Coke Gasification–Combustion Process