Abstract:Image modeling and simulation are critical to extending the limits of leading edge lithography technologies used for IC making. Simultaneous source mask optimization (SMO) has become an important objective in the field of computational lithography. SMO is considered essential to extending immersion lithography beyond the 45nm node. However, SMO is computationally extremely challenging and time-consuming. The key challenges are due to run time vs. accuracy tradeoffs of the imaging models used for the computational lithography. We present a new technique to be incorporated in the SMO flow. This new approach is based on the reduced basis method (RBM) applied to the simulation of light transmission through the lithography masks. It provides a rigorous approximation to the exact lithographical problem, based on fully vectorial Maxwell's equations. Using the reduced basis method, the optimization process is divided into an offline and an online steps. In the offline step, a RBM model with variable geometrical parameters is built self-adaptively and using a Finite Element (FEM) based solver. In the online step, the RBM model can be solved very fast for arbitrary illumination and geometrical parameters, such as dimensions of OPC features, line widths, etc. This approach dramatically reduces computational costs of the optimization procedure while providing accuracy superior to the approaches involving simplified mask models. RBM furthermore provides rigorous error estimators, which assure the quality and reliability of the reduced basis solutions. We apply the reduced basis method to a 3D SMO example. We quantify performance, computational costs and accuracy of our method.

A New Illumination Source Model for Lithography Simulation

Simulation and Experimental Investigation of Immersion Flow Field in Immersion Lithography

Research on the optical field distribution and micro-fabrication model in convex-surface laser lithography

Development of a Lithography Simulation Tool Set in Various Optical Conditions for Source Mask Optimization

New illumination model for scenes containing thin film interference

Freeform Illumination Design Model for Multiple Light Sources Simultaneously.

Compact Ultraviolet Light-Emitting Diode-Based Lithography Illumination System with Tunable Coherent Factor

New Modeling and Optimization Method Suitable for UDSM Lithography Simulation

Source and Mask Co-Optimization Using A Gradient Based Method in Optical Lithography

High Performance Source Optimization Using A Gradient-Based Method in Optical Lithography

Shading with Linear Light Sources

A Study of the Impact on Telecentricity to the Illumination System Based on Ccd Imaging

Design And Simulation Of Double Annular Illumination Mode For Micro-Lithography

A simulation imaging method for actual optical system and results analysis

Reduced basis method for source mask optimization

Gradient-Based Source And Mask Optimization In Optical Lithography

Fast Level-Set-Based Inverse Lithography Algorithm for Process Robustness Improvement and Its Application

Freeform Lens Arrays For Off-Axis Illumination In An Optical Lithography System

New illumination model for scenes containing diffraction gratings

Development of Visible-Light Optical Simulator Based on Liquid Crystal on Silicon Technology

Dynamic Exposure Model of Scanning Beam Interference Lithography