Abstract:As a typical carbon-based material, activated carbon (AC) has satisfied adsorption performance and is of great significance in the field of volatile organic compounds (VOCs) pollutants removal. In order to further reveal the optimization mechanism of AC adsorption performance, coconut shell-based AC was selected as the research object, and different concentrations of HNO 3 coupled with microwave were used for rapid modification and activation. The characteristic changes of pore structure and surface chemical of AC before and after rapid modification were analyzed, and the performance changes of VOCs absorption were discussed from the perspective of reaction kinetics. The pore structure and surface chemical properties of before and after modification were analyzed by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Brunauer-Emmeta-Teller (BET) analysis, Fourier Transform Infrared Spectroscopy (FTIR), and Boehm titration. The results showed that HNO 3 coupled with microwave could significantly eliminate impurities in the pores of AC. After impregnation in HNO 3 at a concentration of 1.5 mol L −1 and under microwave irradiation of 900 W, the number of micropore on the surface of samples increased slightly. When the impregnation concentration of HNO 3 continued to increase, the two adjacent pore structures of the samples merged, which lead to a large decrease in the number of micropore and a corresponding increase in the proportion of mesoporous. Meanwhile, the specific surface area S BET of the modified NAC-6 sample increased to 1,140.40 m 2 g −1 , and the total acidic oxygen-containing functional groups on the surface increased by 0.459 mmol g −1 compared to that of the unmodified raw carbon. Furthermore, by analyzing the experimental results of formaldehyde adsorption on AC samples, it was concluded that the saturated adsorption capacity of the modified NAC-6 sample was 43% higher than that of the raw carbon. This study provides a more convenient and faster modification method for AC in the field of gas phase pollutants purification, which is helpful to realize the practical engineering application of AC with high efficiency, energy saving and sustainable.

Adsorption of Nitrogen Oxides on Coconut Shell Activated Carbon Loaded with Mn-Co Mixed Oxides

Adsorption of Nitrous Oxide on Activated Carbons

Activated Carbon Fibers Loaded with MnO2 for Removing NO at Room Temperature

Nitrogen Doping of Activated Carbon Loading Fe2O3 and Activity in Carbon-Nitric Oxide Reaction

The correlation between the iodine value of coconut shell carbon and their reaction performance for NO2 to NO

Performance optimization and kinetic analysis of HNO3 coupled with microwave rapidly modified coconut shell activated carbon for VOCs adsorption

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

Effect of Nitrogen Doping on the Reduction of Nitric Oxide with Activated Carbon in the Presence of Oxygen

Adsorption of Nitrogen Dioxide on Nitrogen-Enriched Activated Carbons

Mn-promoted CaO-based adsorbents with enhanced CO2 uptake performance

Catalytic oxidation and deionization of nitrite and nitrate ions using mesoporous carbon-supported nano-flaky cobalt and nickel oxyhydroxides

NO x Adsorption Mechanism of Coal-Based Activated Carbon Modified with Trace Potassium: In Situ DRIFTS and DFT Study

CO2 adsorption on chemically modified activated carbon

Manganese oxide–loaded activated carbon for ammonium removal from wastewater: the roles of adsorption and oxidation

An updated study on NO catalytic oxidation over activated carbon: The effect of pore structure and a dual-site mechanism

CO2adsorption on Crab Shell Derived Activated Carbons: Contribution of Micropores and Nitrogen-Containing Groups

Preparation and characterization of activated carbon modified by potassium for carbon dioxide/methane adsorption and separation

Biomass and Coal Modification to Prepare Activated Coke for Desulfurization and Denitrification

Mn-N/C interfacial bridge accelerating electrons transfer of MnCO 3 /α-Ni(OH) 2 to promote surface adsorbates activation for favorable photocatalytic NO oxidation

Effect of K-Modified Blue Coke-Based Activated Carbon on Low Temperature Catalytic Performance of Supported Mn–Ce/Activated Carbon

Preparation of High-Surface-Area Activated Carbon from Coconut Shell Fibers