Abstract:Repeated particle-particle and particle-wall collisions and frictions lead to the generation and accumulation of electrostatic charges in the gas-solid fluidized beds. Variations of electrostatic signals are a rich source of information on particle motions and charging, which have rarely been explored and interpreted. To gain a more comprehensive understanding of the induced electrostatic signals in the fluidized beds, an array of arc-shaped induced electrostatic sensors were attached to the outer wall of a fluidized bed. Combined with cross-correlation method, induced electrostatic voltage signals and correlation velocity of particles were measured simultaneously. It was found that electrostatic charges accumulation restrained the particle motions while the average correlation velocity of particles increased with the amount of injecting liquid antistatic agent. Based on the analyses of induced electrostatic signals, the particle correlation velocity, and the particles charge-to-mass ratio under different charging levels, a predictive model of the average particles charge-to-mass ratio was established. Compared with the results obtained from Faraday cup, the estimated results showed a relative error no more than 40%. Simultaneous measurement of particle correlation velocity and particles charge-to-mass ratio were complemented by arc-shaped induced electrostatic sensors array combined with cross-correlation method.

Detection of Malfunction in Fluidized Bed Based on Chaotic Analysis of Acoustic Emission Signal

Wall Sheeting Diagnosis in Fluidized Beds Based on Chaos Analysis of Acoustic Emission Signals

Multi-scale analysis of acoustic emissions and malfunction diagnosis in gas-solid fluidized bed

Agglomeration Detection by Acoustic Emission (AE) Sensors in Fluidized Beds

Measurement of Flow Pattern in Fluidized Bed Based on Acoustic Emission and Complexity Analysis

From Noise to Information: a New Technology of Olefin Polymerization Fluidized Bed Reactor Based on Acoustic Emission

Malfunction Diagnosis in Horizontal Stirred Bed Reactors Based on Attractor Comparison Analysis of Acoustic Emission Signals

Determination of Particle Size Distribution by Multi-Scale Analysis of Acoustic Emission Signals in Gas-Solid Fluidized Bed

Wavelets Analysis of Pressure Fluctuation in Agitated Fluidized Bed

Detection of polypropylene agglomeration in hsbr based on the analysis of acoustic emission signal by auto-regression model

Soft-sensing System of Gas-Solid Fluidized Bed

Characterization of flow regime transition in gas-solid fluidized bed by recurrence quantification analysis of acoustic emission signals

Characterization of Particle Fluidization Pattern in a Gas Solid Fluidized Bed Based on Acoustic Emission (AE) Measurement

Measurement of Bed Level in Gas-Solid Fluidized Bed by Ultrasonic Technique

Detection of Particle Mass Flowrate in High-Speed Fluidization Based on Acoustic Emission Technology

Determination of Flow Regime by Analysis of Acoustic Signals from Impaction Between Particles and Distributor

Monitoring of Particle Motions in Gas-Solid Fluidized Beds by Electrostatic Sensors

Measurement of Flow Pattern and Bed Level of Gas-solid Fluidized Bed in Borstar Process by Acoustic Emission Technique

Measurement of the Fluidized Velocity in Gas-Solid Fluidized Beds Based on AE Signal Analysis by Wavelet Packet Transform

Agglomeration detection in horizontal stirred bed reactor based on autoregression model by acoustic emission signals

Detection of Sheeting in Polyethylene Gas-Solid Fluidized Bed by Measuring Electrostatic Current