Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

High‐strength Biodegradable Poly(vinyl Alcohol)/fly Ash Composite Films

Chemically Modified Fly Ash for Fabricating Super-Strong Biodegradable Poly(vinyl Alcohol) Composite Films

Surface-coated Fly Ash Reinforced Biodegradable Poly(vinyl Alcohol) Composite Films: Part 2-Analysis and Characterization

High Strength Bio-Composite Films of Poly(vinyl Alcohol) Reinforced with Chemically Modified-Fly Ash

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Hydrogen-Bonding Assembly Of Rigid-Rod Poly(P-Sulfophenylene Terephthalamide) And Flexible-Chain Poly(Vinyl Alcohol) For Transparent, Strong, And Tough Molecular Composites

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

Synthesis and Characterization of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites

Noncovalent Cross‐Linked Network‐Reinforced High‐Toughness Polyvinyl Alcohol/Hyperbranched Polyester Films Obtained Through Solution Blending

Facile Fabrication of High-Performance Composite Films Comprising Polyvinyl Alcohol as Matrix and Phenolic Tree Extracts

Ultrastrong Nanocomposites Reinforced by Cellulose Nanofiber and Lignosulfonate Via Swelling-Assisted Prestretching Orientation

High Strength UV-Resistant Composite Film of Fe3+-Coordination Lignin/PVA

Properties of polyvinyl alcohol films reinforced by citric acid modified cellulose nanocrystals and silica aerogels

Fabrication and characterization of poly(lactic acid-trimethylene carbonate) based biodegradable composite films

Enteromorpha cellulose micro-nanofibrils/poly(vinyl alcohol) based composite films with excellent hydrophilic, mechanical properties and improved thermal stability

Microstructure and Thermal and Tensile Properties of Poly(vinyl Alcohol) Nanocomposite Films Reinforced by Polyacrylamide Grafted Cellulose Nanocrystals

Polyvinyl alcohol flame retardant film based on halloysite nanotubes, chitosan and phytic acid with strong mechanical and anti-ultraviolet properties

Investigation of the effects of cellulose nanofiber on the properties of poly(vinyl alcohol) crosslinked by 2,5-furandicarboxylic acid

Melt-processed Poly (vinyl Alcohol)/corn Starch/nanocellulose Composites with Improved Mechanical Properties

Effects of Inorganic‐organic Surface Modification on the Mechanical and Thermal Properties of Poly(vinyl Chloride) Composites Reinforced with Fly‐ash

Integration of inorganic ionic oligomers and nanocellulose within PVA networks: A degradable and green nanocomposite with self-healable property and high mechanical strength in a wet state