Abstract:Abstract The pantograph and its recess on the train roof are major aerodynamic noise sources on high-speed trains. Reducing this noise is particularly important because conventional noise barriers usually do not shield the pantograph. However, less attention has been paid to the pantograph recess compared with the pantograph. In this paper, the flow features and noise contribution of two types of noise reduction treatments rounded and chamfered edges are studied for a simplified high-speed train pantograph recess, which is represented as a rectangular cavity and numerically investigated at 1/10 scale. Improved delayed detached-eddy simulations are performed for the near-field turbulent flow simulation, and the Ffowcs Williams and Hawkings aeroacoustic analogy is used for far-field noise prediction. The highly unsteady flow over the cavity is significantly reduced by the cavity edge modifications, and consequently, the noise radiated from the cavity is reduced. Furthermore, effects of the rounded cavity edges on the flow and noise of the pantographs (one raised and one folded) are investigated by comparing the flow features and noise contributions from the cases with and without rounding of the cavity edges. Different train running directions are also considered. Flow analysis shows that the highly unsteady flow within the cavity is reduced by rounding the cavity edges and a slightly lower flow speed occurs around the upper parts of the raised pantograph, whereas the flow velocity in the cavity is slightly increased by the rounding. Higher pressure fluctuations occur on the folded pantograph and the lower parts of the raised pantograph, whereas weaker fluctuations are found on the panhead of the raised pantograph. This study shows that by rounding the cavity edges, a reduction in radiated noise at the side and the top receiver positions can be achieved. Noise reductions in the other directions can also be found.

Introduction of Aerodynamic Noise Generated by Foreign EMUs Pantograph

Computational Modelling of the Aerodynamic Noise of the Full-Scale Pantograph of High-Speed Trains

Numerical analysis of aerodynamic noise from pantograph in high-speed trains using lattice Boltzmann method

The Effect of High-Frequency Parametric Excitation on A Stochastically Driven Pantograph-Catenary System

Numerical study on the quadrupole sound source in aerodynamic noise of high-speed pantographs

Analysis of the near-field and far-field sound pressure generated by high-speed trains pantograph system

A study on aerodynamic pass-by noise based on equivalent source method

Numerical study on aerodynamic drag and noise of high-speed pantograph by introducing spanwise waviness

Aerodynamic noise reduction of high-speed pantograph by introducing planar jet on leeward surface of panhead

The distribution of pantograph aerodynamic noise on train external surfaces and the influence of flow

The influence of jet on aerodynamic noise in the pantograph area at different sinking heights

Impact of Aerodynamics of Pantograph of a High-Speed Train on Pantograph-Catenary Current Collection

Research on Aerodynamic Noise Reduction for High-Speed Trains

Study on the aerodynamic noise characteristics of high-speed pantographs with different strip spacings

Aerodynamic drag and noise reduction of a pantograph of high-speed trains with a novel cavity structure

Overview on Development of Pantograph of Electric Locomotive

Coherence and reduced order analyses of flow field and aerodynamic noise for full-scale high-speed trains pantograph

Effect of cavity flow control on high-speed train pantograph and roof aerodynamic noise

Sound source distribution of high-speed trains and reduction of aerodynamic bogie noise

Numerical Comparison in Aerodynamic Drag and Noise of High-Speed Pantographs with or without Platform Sinking

Numerical Computation of Aerodynamic Noise Reduction by Using Ultra-Light Porous Metals