Abstract:Wake vortex evolution of a square cylinder with a slot synthetic jet issuing from the cylinder’s rear surface has been experimentally investigated using the time-resolved particle image velocimetry technique. The Reynolds number based on the side length of the square cylinder is $Re=836$. The excitation frequency normalized by the natural shedding frequency $f_{e}/f_{0}$ varies from 0 to 6 at the dimensionless stroke length $L_{0}/w=72.6$. The distributions of the time-averaged Reynolds stresses present significant differences as the excitation frequency increases. With control, the mean streamwise velocity deficit of the wake recovers more quickly in comparison with the natural case, and the vertical velocity fluctuation intensity becomes weaker. Moreover, a drag reduction can be achieved for the control cases, especially, for $f_{e}/f_{0}=4$ and $f_{e}/f_{0}=6$, a thrust instead of drag reduction can be obtained. The profiles of the mean streamwise velocity tend to have jet-like distributions. The wake vortex dynamics and its evolution with the excitation frequency are revealed. (i) For the low excitation frequency cases ($f_{e}/f_{0}=0.5$, 1, 2), no significant changes in the dominant frequency and the spanwise vortex structures are observed in comparison with the natural case. (ii) For the moderate excitation frequency case ($f_{e}/f_{0}=3$), the wake vortex shedding frequency is locked on half of the control frequency. In this case, the shear layer is divided into two parts by the synthetic jet vortex, and the wake vortices with smaller scales still shed asymmetrically and appear closer to the square cylinder. (iii) For the high excitation frequency case ($f_{e}/f_{0}=6$), the flow is governed by the synthetic jet. As a result of strong perturbations of the synthetic jet, the wake vortex shedding becomes symmetric with the shedding frequency consistent with the control frequency. And the separation is suppressed effectively. The different control effects of the slot synthetic jet on a square cylinder and a circular cylinder are also compared in detail. Generally speaking, the circular cylinder is easier to be controlled due to its non-fixed separation points.

The influence of jet on aerodynamic noise in the pantograph area at different sinking heights

Aerodynamic noise reduction of high-speed pantograph by introducing planar jet on leeward surface of panhead

Numerical study on aerodynamic drag and noise of high-speed pantograph by introducing spanwise waviness

Computational study on aerodynamic noise reduction of high-speed train bogie region using leading edge jet of the bogie cavity

Numerical study on the quadrupole sound source in aerodynamic noise of high-speed pantographs

Numerical Comparison in Aerodynamic Drag and Noise of High-Speed Pantographs with or without Platform Sinking

Wake Vortex Evolution of Square Cylinder with A Slot Synthetic Jet Positioned at the Rear Surface

Study on the aerodynamic noise characteristics of high-speed pantographs with different strip spacings

Effect of cavity flow control on high-speed train pantograph and roof aerodynamic noise

Coherence and reduced order analyses of flow field and aerodynamic noise for full-scale high-speed trains pantograph

Analysis of the near-field and far-field sound pressure generated by high-speed trains pantograph system

Aerodynamic drag and noise reduction of a pantograph of high-speed trains with a novel cavity structure

The distribution of pantograph aerodynamic noise on train external surfaces and the influence of flow

Control of Vortex Shedding from Two Side-by-side Cylinders Using a Pair of Tangential Jets

Noise Control for High Subsonic Jet Flows by Inner Wall Treatment

Adaptability of Turbulence Models for Pantograph Aerodynamic Noise Simulation

Impact of Aerodynamics of Pantograph of a High-Speed Train on Pantograph-Catenary Current Collection

Computational Modelling of the Aerodynamic Noise of the Full-Scale Pantograph of High-Speed Trains

Numerical analysis of aerodynamic noise from pantograph in high-speed trains using lattice Boltzmann method

Effect of the Strip Spacing on the Aerodynamic Performance of a High-Speed Double-Strip Pantograph

Research on Aerodynamic Noise Reduction for High-Speed Trains