Abstract:The aerodynamic noise has been the dominant factor of noise issues in high-speed train as the traveling speed increases. The inter-coach windshield region is considered as one of the main aerodynamic noise sources; however, the corresponding characteristics have not been well investigated. In this paper, a hybrid method is adopted to study the aerodynamic noise around the windshield region. The effectiveness of simulation methods is validated by a simple case of cavity noise. After that, the Reynolds-averaged Navier–Stokes simulation is used to obtain the characteristics of flow field around the windshield region, which determine the aerodynamic noise. Then the nonlinear acoustic solver approach is employed to acquire the near-field noise, while the Ffowcs-Williams/Hawking equation is solved for far-field acoustic propagation. The results indicate that the windshield region is approximately an open cavity filled with severe disturbance flow. According to the analysis of sound pressure distribution in the near-acoustic field, both sides of the windshield region appear symmetrical two-lobe shape with different directivities. The results of frequency spectrum analysis indicate that the aerodynamic noise inside inter-coach space is a typical broadband one from 100 Hz to 5k Hz, and most acoustic power is restricted in the low-medium frequency range (below 500 Hz). In addition, the acoustic power in the low frequency range (below 100 Hz) is closely related to the cavity resonance with the resonance peak frequency of 42 Hz. The overall sound pressure level at different speeds shows that the acoustic power grows approximately 5th power of the train speed. Two forms of outside-windshields are designed to reduce the noise around the windshield region, and the results show the full-windshield form is better in noise reduction, which apparently eliminates interior cavity noise of inter-coach space and lessens the overall sound pressure level on the sides of near-field by about 13 dB.

Numerical Computation of Aerodynamic Noise Reduction by Using Ultra-Light Porous Metals

Prediction of aerodynamic noise reduction by using open-cell metal foam

Numerical study on passive flow and noise control for flow past cylinder by porous media coatings

Research on Aerodynamic Noise Reduction for High-Speed Trains

Numerical study on aerodynamic drag and noise of high-speed pantograph by introducing spanwise waviness

Numerical analysis of transport in porous media to reduce aerodynamic noise past a circular cylinder by application of porous foam

Step-by-Step Numerical Prediction of Aerodynamic Noise Generated by High Speed Trains

Computational Modelling of the Aerodynamic Noise of the Full-Scale Pantograph of High-Speed Trains

Numerical study on reducing aerodynamic drag and noise of circular cylinders with non-uniform porous coatings

Numerical investigation into characteristics of far-field aerodynamic noise radiated by inter-coach space of high-speed maglev trains

Computational study on aerodynamic noise reduction of high-speed train bogie region using leading edge jet of the bogie cavity

Numerical analysis of aerodynamic noise from pantograph in high-speed trains using lattice Boltzmann method

Analysis of the near-field and far-field sound pressure generated by high-speed trains pantograph system

A Numerical Study on the Sound Transmission Loss of HST Aluminum Extruded Panel

Numerical study of aerodynamic and aeroacoustic characteristics of flow over porous coated cylinders: Effects of porous properties

Numerical Investigation of Noise Reduction of a Pump-Jet Propulsor Using Porous Metal

Aerodynamic and Noise Computations of High-Speed Train and Tunnel Interaction

Aerodynamic Noise Radiating from the Inter-Coach Windshield Region of a High-Speed Train

Study on prediction in far-field aerodynamic noise of long-marshalling high-speed train

A study on aerodynamic pass-by noise based on equivalent source method

Study on the aerodynamic performance and noise of windshield area in high-speed trains at a frequency of 38 hz