Abstract:Abstract Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications, including optical atomic clocks, microwave photonics, spectroscopy, optical wave synthesis, frequency conversion, communications, lidar, optical computing8, and astronomy9. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity10 or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-picosecond pulses can be synthesized without mode-locking, by modulating a continuous-wave (CW) single-frequency laser using a cascade of electro-optic (EO) modulators. This method is particularly attractive due to its simplicity, robustness, and frequency-agility but has been realized only on a tabletop using multiple discrete EO modulators and requiring optical amplifiers (to overcome large insertion losses), microwave amplifiers, and phase shifters. Here we demonstrate a chip-scale femtosecond pulse source implemented on an integrated lithium niobate (LN) photonic platform, using cascaded low-loss electro-optic amplitude and phase modulators and chirped Bragg grating, forming a time-lens system. The device is driven by a CW distributed feedback (DFB) chip laser and controlled by a single CW microwave source without the need for any stabilization or locking. We measure femtosecond pulse trains (520 fs duration) with a 30-GHz repetition rate, flat-top optical spectra with a 10-dB optical bandwidth of 12.6 nm, individual comb-line powers above 0.1 milliwatt, and pulse energies of 0.54 picojoule. Our results represent a tunable, robust and low-cost integrated pulsed light source with CW-to-pulse conversion efficiencies an order of magnitude higher than achieved with previous integrated sources. Our pulse generator can find applications from ultrafast optical measurement to networks of distributed quantum computers.

Nonlinear-microscopy optical-pulse sources based on mode-locked semiconductor lasers.

Two-photon Bioimaging with Picosecond Optical Pulses from a Semiconductor Laser

High-energy picosecond pulses with a single spatial mode from a passively mode-locked, broad-area semiconductor laser

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

Picosecond-pulse amplification with an external passive optical cavity.

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

10GHz regeneratively mode-locked erbium-doped fiber laser combined with nonlinear amplifying loop mirror

Generation of Ultrashort Optical Pulse by Colliding-Pulse Mode Locking in Semiconductor Laser Diodes

Monolithically integrated tunable mode-locked laser diode source with individual pulse selection and post-amplification

100 MW Peak Power Picosecond Laser Based on Hybrid End-Pumped Nd:YVO4 and Side-Pumped Nd:YAG Amplifiers

Efficient multiphoton microscopy with picosecond laser pulses

Pulsed swept-source FDML-MOPA laser with kilowatt picosecond pulses around 1550 nm

Sub-100-fs bulk solid-state lasers near 2-micron

Femtosecond Pulse Generation via an Integrated Electro-Optic Time Lens

Widely-tunable synchronisation-free picosecond laser source for multimodal CARS, SHG, and two-photon microscopy

Red picosecond pulses generated by frequency doubling a Raman amplified widely tunable 1.3 microm fiber ring laser

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

Generation of Steady-state Ultrashort Laser Pulses Based on a Novel Nonlinear Michelson Interferometer

Generation of 8-fs and 13-nJ pulse from a Yb-fiber system with nonlinear-pulse-compression

Multi-wavelength Mode-Locked Er/Yb Co-doped Fiber Laser with Square Nano-Second Pulse Output

High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy