Abstract:GHz pulsed thulium-doped fiber laser with stabilized repetition rate can enable a wide range of applications. By employing regenerative mode-locking and cavity stabilization technique, we have for the first time demonstrated a 10 GHz polarization-maintaining thulium-doped fiber laser, which has a long-term repetition-rate stabilization and picosecond timing-jitter. In our experiment, a RF circuitry is designed to extract the 10 GHz longitudinal clock signal so that stable regenerative mode-locking is achieved. A piezo actuator-based phase-lock-loop is used to lock the regeneratively mode-locked pulses to a local reference synthesizer. The regeneratively mode-locked pulses with picosecond pulse width exhibit a high super-mode suppression ratio of 60 dB. In addition, the repetition rate of the laser shows good long-term stability with a variation of 8 Hz in 8 hours, corresponding to a cavity free spectral range fluctuation of less than 16 mHz. Meanwhile, the Allan deviation of the stabilized 10 GHz regeneratively mode-locked pulses is measured to be as low as 2 x 10(-12) over 1000 s average time, which is only limited by the stability of the reference synthesizer. Such an ultra-stable 10 GHz pulsed thulium fiber laser may find potential application in 2 mu m optical communication, material processing and spectroscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

10GHz regeneratively mode-locked erbium-doped fiber laser combined with nonlinear amplifying loop mirror

Generation of 583 fs optical pulses at 10 GHz from a regeneratively mode-locked fiber laser combining nonlinear polarization evolution

Low-repetition-rate, high pulse energy all-polarization-maintaining Er-doped fiber laser mode-locked with a nonlinear amplifying loop mirror

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

Research Advances in Mode-Locked Fiber Lasers Based on Nonlinear Loop Mirror

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

870 Fs, 448 Khz Pulses from an All-Polarization-maintaining Yb-doped Fiber Laser with a Nonlinear Amplifying Loop Mirror.

Robust 700 MHz Mode-Locked Yb:fiber Laser with a Biased Nonlinear Amplifying Loop Mirror.

10 GHz Regeneratively Mode-Locked Thulium Fiber Laser with a Stabilized Repetition Rate

In-situ aligned all-polarization-maintaining Er-doped fiber laser mode-locked by a nonlinear amplifying loop mirror

Noise-like pulses with 2.15 MHz repetition rate in an all-polarization-maintaining mode-locked fiber laser at the center wavelength of 1550 nm

313 Mhz Repetition Rate Mode-Locked Yb: Fiber Laser with Phase-Biased Nonlinear Amplifying Loop Mirror

Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

Repetition Rate Precision Lock Of Nonlinear Amplifying Loop Mirror Passively Mode-Locked Fiber Laser

Environmentally stable Er-fiber mode-locked pulse generation and amplification by spectrally filtered and phase-biased nonlinear amplifying long-loop mirror

Mode-locked All-Fiber Dumbbell-Shaped Laser Based on a Nonlinear Amplifying Optical Loop Mirror.

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Low-Repetition-Rate All-Fiber All-Normal-Dispersion Yb-Doped Mode-Locked Fiber Laser

All-Optical 20-Μhz-level Repetition Rate Stabilization of Mode Locking with a Nonlinear Amplifying Loop Mirror

84-Fs 500-Mhz Yb:Fiber-Based Laser Oscillator Mode Locked by Biased NALM

Low-repetition-rate, high-energy, twin-pulse, passively mode locked Yb3+-doped fiber laser