Abstract:The possibility of complex processing of silica-containing plant biomass with the selection of a line of target products is investigated. The method includes the mechanochemical treatment of biomass in a solution of sodium hydroxide in a rotary pulsation apparatus at a temperature of self-heating not lower than 80 °C. The resulting suspension is separated on a solid residue and an extract. The solid residue is washed and dried to obtain pulp powder. The bio-filled silica gel with an SiO2 content of 49.4 wt.% to 62.6 wt.% is isolated from the extract after separation of the solid residue. By ashing the silicon-containing product at a temperature of 600 °C, amorphous silica is obtained. The content of SiO2 (as the target component) in the ash is 85.5–92.0%. The SiO2 diffraction pattern is characterized by the presence of a diffuse halo with a maximum at 2q=22.75 ° and the absence of diffraction peaks. Preliminary acid leaching can increase the purity of the resulting silica to 99.0%. The specific surface area of the obtained silica was determined by the BET method for nitrogen sorption at 260 m2/g. The effect of the concentration of the extractant on the yield of alkali-soluble substances and the degree of leaching of silicon was studied. It was shown that even at a 1% concentration of the extractant (NaOH), almost complete leaching of silicon from the plant matrix occurs. Depending on the increase in the concentration of NaOH, the degree of delignification of the biomass increases to 13–18–22%, respectively, with an increase in the concentration of NaOH 1–5–10%. Powdered cellulose was obtained with a content (%): silicon – 1.12, lignin – 34.8, alpha cellulose – 86.0, with a yield of 33.0% and a particle distribution of 80–300 μm. The amount of biomass loss is 17.6 wt.%.

Modification of Measuring Method for Silicon Dioxide Content in the Process of Pulping with Straw

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

Spectrophotometeric Determination of Silicon in Rice Straw and Black Liquor after Rice Straw Alkaline Pulping by Silicomolybdate Blue

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

THE ACID-BASE PROPERTIES OF AMORPHOUS SILICA FROM STRAW AND RICE HUSK

Study on preparation and surface modification of precipitated silica obtained from fly ash

Problems with biogenic silica measurement in marginal seas

An Investigation of the Effect of Ultrasonic Waves on the Efficiency of Silicon Extraction from Coal Fly Ash.

Determination of Silicon in Zeolite Molecular Sieves by Molybdosilicate Blue Photometry

Silicon extraction from x-ray amorphous soil constituents: a method comparison of alkaline extracting agents

A SIMPLIFIED METHOD FOR THE DETERMINATION OF AMYLOSE CONTENT IN RICE

RESEARCH ON THE EXTRACTIONOF AMORPHOUS SiO2 FROM HIGH-ALUMINIUM FLY ASH

Synchronous Silicon Removal and Viscosity Reduction in the Soda-Oxygen Pulping of Wheat Straw

SOLUBLE SiO2 CON TENT IN FLY ASH UNDER DIFFERENT ALKALI CONDITIONS AND THE RELA-TIONSHIP BETWEEN THE CONCENTRATION AND POZZOLANIC ACTIVITY INDEX OF FLY ASH

A New Reducing Agent for Determination of Silicon Content in Water ——mixture of Gibberellin, Glucose and Tin Dichloride

Comparative analysis of borate fusion versus sodium carbonate extraction for quantification of silicon contents in plants

Enhancement effects of ultrasound on the extraction efficiency of silicon from coal fly ash

Extraction of sodium metasilicate from fly ash to Al2O3 production wastewater

MECHANOCHEMICAL METHOD OF PROCESSING SILICA-CONTAINING PLANT MATTER

Regulable surface hydroxyl group content in disperse ultrafine amorphous SiO2 nanoparticles

Pouring and Curing for Sample Preparation Technology for the Analysis of the Silicon-Aluminum Ratio of Molecular Sieves by Energy Dispersive X-Ray Fluorescence (EDXRF)