Abstract:Capturing SO2 using natural limestone in situ is an important way of desulfuration in a circulating fluidized bed (CFB) boiler. The limestone desulfuration mainly consists of two processes in the condition of standard pressure and air atmosphere: calcination and sulfuration. Water vapor in the flue gas influences the calcination, and the physical characteristics such as the pore structure of calcined CaO play an important role in the following sulfation. The impacts of water vapor during calcination may be reflected on the surface micromorphology and pore structure of calcined CaO. This work aims to understand the influence of water vapor on surface morphology and pore structure of calcined CaO. One kind of Chinese limestone was used to study the issues in a rotatable fluidized bed reactor. Scanning electron microscope (SEM), confocal scanning laser microscope (CSLM), mercury injection apparatus (MIP), and N-2 adsorption instrument were employed to test the micromorphology and pore structure of calcined CaO. Results show that the existence of water vapor accelerates calcination and shortens the reaction time, but higher water vapor content results in slightly lower ultimate degree of conversion. Testing results of SEM and CSLM show that water vapor improves sintering and growth of grains of calcined CaO. The change of surface roughness also proves the above conclusion; besides, the results of MIP and N-2 adsorption instrument show that there are pores with a size range of 15-80 nm inside calcined CaO without H2O(g), and after sintering under the condition of H2O(g), they will combine together to form relatively bigger pores with a size range of 40-100 nm. As a result, the average pore size increases and the specific surface area decreases but the specific pore volume is less influenced. The fractal dimensions of pore structure for calcined CaO under different concentrations of water vapor were calculated using the data of N-2 adsorption. Results show that as the concentration of water vapor increases, the fractal dimension first decreases and then slightly increases but is still lower than that without H2O(g). It means that the pore structure of calcined CaO becomes simpler with the impact of water vapor, which is beneficial for the reaction between calcined CaO and gases such as SO2.

Experimental Study on the Sulfation Characteristics of Limestone Under High CO2 Atmosphere

Calcination–carbonation Durability of Nano CaCO3 Doped with Li2SO4

Comparison of Characteristics of Calcium-Based Desulfurization in Air and in an Atmosphere of O2/CO2

Experimental Study on Preparation of Calcium Oxide by Coal Reduction of Calcium Sulfate in Carbon Dioxide Atmosphere

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Understanding the Enhancement Effect of Na2CO3 Additive on the Direct Sulfation of Limestone

THE EFFECTS OF CO2 CONCENTRATION ON LIMESTONE DESULFURIZATION DURING O2/CO2 COMBUSTION

Effect of H_2S on the CO_2 capture capacity of limestone in calcination/carbonation cycles

Experimental Investigation of Sulfation Phenomena in Calcium Looping Systems Integrated in Cement Plants

The Effect of Na2CO3 on Direct Sulfuration of CaCO3 in the Atmosphere of O2/CO2

Understanding Sulfation Effect on the Kinetics of Carbonation Reaction in Calcium Looping for CO2 Capture

AFM Investigation of the Morphology of CaSO4 Product Layer Formed During Direct Sulfation on Polished Single-Crystal CaCO3 Surfaces at High CO2 Concentrations

Trace Na2CO3 Addition to Limestone Inducing High-Capacity SO2 Capture.

Oxyfuel Combustion Conference Mechanisms for Calcination and Sulfation of Limestone during Oxy-Fuel Combustion

Experiment on H2S removal by limestone in fluidized bed

Characterization of the enhancement effect of Na2CO3 on the sulfur capture capacity of limestones

Characterization of the sulfation reactivity of limestones with different particle size in a large-capacity TGA

Reaction Characteristics of Phosphogypsum Under Carbon Monoxide Atmosphere

Experimental Study on Additive Enhanced Limestone Wet Flue Gas Desulfurization

Influence of Water Vapor on Surface Morphology and Pore Structure During Limestone Calcination in A Laboratory-Scale Fluidized Bed

Effects of high steam partial pressure on desulfurization process of limestone