Abstract:The formation of polymeric micro-patterns on various substrates via a photolithography procedure has been widely used in semiconductor fabrication. Standard polymer patterns are usually fabricated via photosensitive polymer varnishes, in which large amounts of potentially harmful solvents with weight ratios over 50 wt% have to be removed. In the current work, a novel pattern-formation methodology via solvent-free electrospun photosensitive polymeric fibrous membranes (NFMs) instead of the conventional photosensitive solutions as the starting photoresists was proposed and practiced. For this purpose, a series of preimidized negative auto-photosensitive polyimide (PSPI) resins were first prepared via the two-step chemical imidization procedure from the copolymerization reactions of 3,3′,4,4′-benzophenonetetracarboxylic- dianhydride (BTDA) and two ortho-methyl-substituted aromatic diamines, including 3,3′,5,5′-tetramethyl-4,4′-diaminodiphenylmethane (TMMDA) and 3,7-diamino-2,8-dimethyl- dibenzothiophene sulfone (TSN). The derived homopolymer PI-1 (BTDA-TMMDA) and the copolymers, including SPI-2~SPI-6, with the molar ratio of 5~25% for TSN in the diamine units, showed good solubility in polar solvents. Then, a series of PSPI NFMs were fabricated via standard electrospinning procedure with the developed PSPI solutions in N,N-dimethylacetamide (DMAc) with a solid content of 25 wt% as the starting materials. The derived PSPI NFMs showed good thermal stability with 5% weight loss temperatures higher than 500 °C in nitrogen. Meanwhile, the derived PSPIs showed good photosensitivity to the ultraviolet (UV) emitting wavelengths of i-line (365 nm), g-line (405 nm) and h-line (436 nm) of the high-pressure mercury lamps in both forms of transparent films and opaque NFMs. Fine micro-patterns with a line width of around 100 μm were directly obtained from the representative SPI-4 NFM via standard photolithography procedure.

Pattern formation in polymer films under the mask

Recent progress in non-photolithographic patterning of polymer thin films

Pattern Formation in a Confined Polymer Film Induced by a Temperature Gradient

A Facile Method of Forming Nanoscale Patterns on Poly(ethylene Glycol)-Based Surfaces by Self-Assembly of Randomly Grafted Block Copolymer Brushes.

100 Nm Period Gratings Produced by Lithographically Induced Self-Construction

Micropatterning of Conducting Polymer Thin Films on Reactive Self-assembled Monolayers

Micropattern Fabricated by Acropetal Migration Controlled through Sequential Photo and Thermal Polymerization

Formation of Regular Hole Pattern in Polymer Films

Spatial patterning of colloidal nanoparticle-based thin film by a combinative technique of layer-by-layer self-assembly and lithography

Implementation of high‐performance, freestanding flexible film masks through photosensitive polyimide for arbitrary surface micropatterns creation

Facile fabrication of patterned polymeric films via phase separation-induced surface segregation

Ultrafast Large Area Micropattern Generation in Non-absorbing Polymer Thin-Films by Pulsed Laser Diffraction

Two-Dimensional Self-Assembly of Latex Particles in Wetting Films on Patterned Polymer Surfaces

A Simple Method to Fabricate A Conductive Polymer Micropattern on an Organic Polymer Substrate

Hierarchical Polymer Patterns Driven by Capillary Instabilities at Mobile and Corrugated Polymer–polymer Interfaces

Self Assembly of Polymer Structures Induced by Electric Field

Directed self-assembly of block copolymer films on atomically-thin graphene chemical patterns

Dynamic Porous Pattern Through Controlling Noncovalent Interactions in Polyelectrolyte Film for Sequential and Regional Encapsulation.

Controllable Preparation of Block Copolymer Films with Self- Organized Patterns for the Template of Closely - Spaced Nanoparticle Array Formation

Formation of Nano-Fibrous Patterns on Aluminum Substrates via Photolithographic Fabrication of Electrospun Photosensitive Polyimide Fibrous Membranes

Self-Assembly of Patterned Porous Films from Cyclic Polystyrenes Via the Breath Figure Method