Abstract:A series of samples, prepared from mechanical mixtures of inorganic salts (MoO3, CuCl2, NiCl26H2O, and Ni(NO3)26H2O) with zeolites (NaZSM-5, NaY, NaY, and MCM-41), have been investigated by X-ray diffraction (XRD), differential thermal analysis (DTA), the adsorption of probing molecules, and the determination of pore size distribution. After the heating of MoO3with zeolites at 723 K for 24 h, the samples (MoO3/NaZSM-5/NaY/MCM-41=0–0.088/0–0.24/0–0.45 g/g) show only those X-ray peaks assigned to zeolites, the characteristic peaks of MoO3having disappeared completely, which suggests that MoO3is highly dispersed in the pores of zeolites. Similar phenomena are observed for the samples of CuCl2/NaZSM-5, CuCl2/NaY, NiCl2/NaZSM-5, NiCl26H2O/NaY, and Ni(NO3)26H2O/NaY. In contrast, the inorganic salts of NiCl26H2O and Ni(NO3)26H2O cannot be dispersed into the channels of NaZSM-5 zeolite due to the limitation of the channel size. These results suggest that the dispersion only occurs under the condition that the diameter of the inorganic salts is less or similar to the pore size of the zeolites. Also, we observed that the dispersion capacity of the inorganic salts is strongly related to the pore size of the zeolites. Furthermore, the isotherms for probing molecules show that the dispersion of inorganic salts into zeolites leads to significant change in the pore size of zeolites. The MoO3/NaY samples exhibit that the pore size was selectively formed at 6.8–8.0, 6.0–6.8, 4.3–6.0, and 3.0–4.3 Å with MoO3loading at 0.08, 0.16, 0.21, and 0.24 g/g, respectively. Therefore, it is proposed that we could modify the pore sizes of zeolites to various degrees, which may be very useful to design suitable pores of zeolites for the catalysts in catalytic reactions. Catalytic data in selective reduction of NO by propylene at the temperature of 300°C show that CuCl2/HZSM-5 catalyst prepared from the dispersion method exhibits much higher catalytic conversion (39%: N2yield) than that (21%: N2yield) of CuZSM-5 catalyst prepared from the ion-exchange method.

The High Dispersion of CuCl 2 in NaZSM-5 by Using Microwave Technique

The High Dispersion of CuCl2in ZSM-5 by Using Microwave Method

New Route for Dispersion of Inorganic Salts Onto the Channel Surfaces of Microporous Crystals: High Dispersion of CuCl2 in Zeolites Using a Microwave Technique

Rapid Synthesis of Mordenite Crystals by Microwave Heating

Microwave-Assisted Rapid Synthesis Of Zno Hexagonal Quasi-Hourglasses

Preparation of Nano-Kaolinite by Microwave-Assisted Chemical Reaction

Dispersion of Inorganic Salts into Zeolites and Their Pore Modification

Investigation of the Microporous Structure and Non-Framework Aluminum Distribution in Dealuminated Nanosized HZSM-5 Zeolite by 129xe NMR Spectroscopy

Synthesis and characterization of MCM-49/ZSM-35 composite zeolites in the hexamethyleneimine and cyclohexamine system

Microwave synthesis conditions dependent catalytic performance of hydrothermally aged CuII-SSZ-13 for NH3-SCR of NO

Microwave Synthesis of Zeolite NaA From Hydrothermal

The Preparation of ZSM-5 Zeolite@cu/stainless Steel As a Dual Functional Material

Microwave synthesis process for ZSM-11 molecular sieve

Preparation of CdS and ZnS nanoparticles using microwave irradiation

Microwave Synthesis Of Nanocrystalline Metal Sulfides In Formaldehyde Solution

Calcination Of Kaolinite And Synthesis Of 4a Zeolite Used In Detergent With Microwave Method

Insight into Kinetic Behavior of Microwave-assisted Synthesis of NaX Zeolite from Lithium Slag

Studies of the interaction between CuCl and HY zeolite for preparing heterogeneous CuI catalyst

Microwave synthesis of zeolites and their related applications

STUDY ON SYNTHESIS OF MESOPOROUS MOLECULAR SIEVE MCM-41 Ⅱ. Microwave Synthesis Method

Dual-ligand mediated one-pot self-assembly of Cu/ZnO core/shell structures for enhanced microwave absorption