Abstract:The investigation of stress field and plastic zone distribution at the closed crack tip provides a fundamental basis for failure analysis and life prediction of geotechnical materials. Closed crack is a common crack in geotechnical materials. Studying the distribution of stress field and plastic zone at the tip of closed crack can provide theoretical basis for stability evaluation of geotechnical structures. In this study, we employ the superposition principle to obtain complex function solutions for the stress field and displacement field at the crack tip. Furthermore, we analyze the plastic zone distribution at the crack tip based on the Mohr Coulombs criterion. We investigate how factors such as crack angle, confining pressure, and material properties influence the stress field, displacement field, plastic zone size, and crack propagation direction. Our results demonstrate that this method effectively characterizes the distribution of stress field and displacement field at closed crack tips. Moreover, we elucidate that wing cracks are primarily formed due to tension-shear coupling effects. The solutions for the stress field and displacement field at the crack tip are obtained using the superposition principle. The distribution of the plastic zone at the crack tip is analyzed based on the M-C (Mohr-Coulomb) criterion. Subsequently, an analysis is conducted to investigate the influence of crack angle, confining pressure, and material properties on stress field, displacement field, plastic zone, and crack propagation direction. Lower crack angles and higher confining pressures effectively suppress slip between crack surfaces by reducing tension-shear coupling effects and inhibiting wing foil crack development. The results further indicate that the rock cohesion and internal friction angle exert negligible influence on the stress field, displacement field, plastic zone shape at the crack tip, as well as the growth direction of new cracks. The results demonstrate the effective representation of stress field and displacement field at the closed crack tip using this method. The stress distribution at the crack tip reveals that the tension-shear coupling effect primarily contributes to wing crack formation. Lower crack angles and higher confining pressures effectively suppress surface slip, reduce tension-shear coupling effects, and inhibit wing crack propagation. Furthermore, material properties do not influence the crack propagation angle, stress field, or displacement field.

Plastic stress-strain fields and limit loads of a plane strain cracked tensile panel with a mismatched welded joint

Analytical solution of the stress field and plastic zone at the tip of a closed crack

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Study of the Mixed Tensile-Shear Ductile Fracture of Impulsively Loaded Metal Plates by Developing a Phase-Field Fracture Model with Stress Triaxiality and Lode Parameter Dependence

Plastic Limit Load Analysis of Tee Joint Containing Corner Cracks

Development and Evaluation of Methods of Plane Stress Fracture Analysis. Part 3. Application of the Residual Strength Prediction Technique to Complex Aircraft Structure

Quantification of constraint effects in elastic-plastic crack front fields

Three-dimensional Stress and Stress Intensity for Tensioned Flat Plates with Edge Cracks

A Simplified Computation Method of Plastic Limit Load for Tee Joint Containing Corner Cracks

T-stresses solution and out-of-plane constraint for central cracked plate (CCP) with I-II mixed mode crack under uniaxial compression

Crack Linkup And Residual Strength Of Multi-Hole Component

Ultimate strength of stiffened panels with a crack and pits under uni-axial longitudinal compression

Multiple crack problem in nonhomogeneous composite materials subjected to dynamic anti-plane shearing

Evolution of a crack embedded in an elastic-plastic plate

Stress analysis of an elastic semi-infinite plate containing internal crack

Theoretical solutions for 2D mode-I crack-tip stress fields in power-law plastic materials based on the stress factor derived from the developed median-energy-density equivalence method

FEM Solutions for Plane Stress Mode-I and Mode-Ii Cracks in Strain Gradient Plasticity

Elastic–plastic finite element analysis and experimental study of short and long fatigue crack growth

Unified theoretical solutions for describing the crack-tip stress fields of mode-II cracked specimens under the fully plastic condition

Stress and strain fields near cracks in solids with stress state-dependent elastic properties under conditions of anti-plane shear

The Stress Intensity Factors of Multiple Inclined Cracks in a Composite Laminate Subjected to In-Plane Loading