Abstract:In order to represent the mechanical response laws of high-modulus asphalt pavement (HMAP) faithfully and objectively, the viscoelasticity of high-modulus asphalt mixture (HMAM) was considered, and the viscoelastic mechanical responses were calculated systematically based on moving load by numerical simulations. The performances of the HMAP in resistance to the deformation and the cracking at the bottom layer were compared with the ordinary asphalt pavement. Firstly, Lubao and Honeywell 7686 (H7686) were selected as the high modulus modifiers. The laboratory investigations of Asphalt mix-70 penetration, Asphalt mix-SBS (styrene-butadiene-styrene), HMAM-Lubao and HMAM-H7686 were carried out by dynamic modulus tests and wheel tracking tests. The conventional performances related to the purpose of using the HMAM were indicated. The master curves of the storage moduli were obtained and the viscoelastic parameters were fitted based on viscoelastic theories. Secondly, 3D pavement models based on moving loads for the viscoelastic structures were built using the non-linear finite element software ABAQUS. The wheel path was discretized in time and space to apply the Haversine wave load, and then the mechanical responses of four kinds of asphalt pavement were calculated. Finally, the sensitivity analysis was carried out. The results showed that the addition of the high modulus modifiers can improve the resistance to high-temperature rutting of the pavements. Except for the tensile strain and stress at the bottom of the underlayer, other responses decreased with the increases of the dynamic moduli and the change laws of the tensile strain and stress were affected by the range of the dynamic modulus. The tensile stress at the bottom of the asphalt layer would be too large if the modulus of the layer were too large, and a larger tensile strain would result. Therefore, the range of the modulus must be restricted to avoid the cracking due to excessive tension when using the HMAM. The resistance of the HMAP to deformation was better and the HMAP was less sensitive to load changes and could better withstand the adverse effects inflicted by heavy loads.

A Statistical Analysis of Hamburg Wheel Tracking Device Testing Results

Characterization of Hamburg Wheel Tracking Device Testing Results

Evaluation of Test Methods for Fracture Resistance of High Modulus Asphalt Binders from Rheological and Mechanical Perspectives

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Rheological Behavior of High Modulus Asphalt Binder and Its Indication for Fracture Performances

Characterization of Asphalt Mixtures Using Controlled-Strain Repeated Direct Tension Test

Aggregate Distribution Influence On The Indirect Tensile Test Of Asphalt Mixtures Using The Discrete Element Method

Horizontal Homogeneity in Laboratory-Compacted Asphalt Specimens

Viscoelastic Mechanical Responses of HMAP under Moving Load.

Long-Term Field Rutting and Moisture Susceptibility Performance of Warm-Mix Asphalt Pavement

Simulation of Effect of Horizontal Aggregate Distribution on Indirect Tensile Test of Asphalt Mixtures Using Discrete Element Method

Simulation of wheel tracking test for asphalt mixture using discrete element modelling

Tracking particle displacements in unbound aggregate layers of roadways

Autonomous trucks’ (ATs) lateral distribution and asphalt pavement performance

Predicting rutting performance of asphalt mixture from binder properties and mixture design variables

Finite element analysis of rutting on full depth asphalt pavement in port area considering temperature field

Modelling of perpetual pavement performance subjected to varying European three-dimensional truck tire loading

Permanent Deformation Monitoring and Remaining Life Prediction of Asphalt Pavement Combining Full-Scale Accelerated Pavement Testing and FEM

Evaluation of factors that affect rutting resistance of asphalt mixes by orthogonal experiment design

Assessing the impact of volumetric mix-design parameters and compaction levels on rutting performance of asphalt pavements: a comprehensive analysis

Deformation Modelling of Instrumented Flexible Pavement Structure