Abstract:Plant fiber-reinforced polylactic acid (PLA) exhibits excellent mechanical properties and environmental friendliness and, therefore, has a wide range of applications. This study investigated the mechanical properties of three short plant fiber-reinforced PLA composites (flax, jute, and ramie) using mechanical testing and material characterization techniques (SEM, FTIR, and DSC). Additionally, we propose a methodology for predicting the mechanical properties of high-content short plant fiber-reinforced composite materials. Results indicate that flax fibers provide the optimal reinforcement effect due to differences in fiber composition and microstructure. Surface pretreatment of the fibers using alkali and silane coupling agents increases the fiber–matrix interface contact area, improves interface performance, and effectively enhances the mechanical properties of the composite. The mechanical properties of the composites increase with increasing fiber content, reaching the highest value at 40%, which is 38.79% higher than pure PLA. However, further increases in content lead to fiber agglomeration and decreased composite properties. When the content is relatively low (10%), the mechanical properties are degraded because of internal defects in the material, which is 40.42% lower than pure PLA. Through Micro-CT technology, the fiber was reconstructed, and it was found that the fiber was distributed mainly along the direction of injection molding, and the twin-screw process changes the shape and length of the fiber. By introducing the fiber agglomeration factor function and correcting the Halpin-Tsai criterion, the mechanical properties of composite materials with different contents were successfully predicted. Considering the complex stress state of composite materials in actual service processes, a numerical simulation method was established based on transversely isotropic material using the finite element method combined with theoretical analysis. The mechanical properties of high-content short plant fiber-reinforced composite materials were successfully predicted, and the simulation results showed strong agreement with the experimental results.

Processing–microstructure-property predictions for short fiber reinforced composite structures based on a spray deposition process

Microstructures and Mechanical Properties of Engineered Short Fibre Reinforced Aluminium Matrix Composites

Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method

Particulate Reinforced Metal Matrix Composites Prepared by Spray Forming:An Overview

Prediction and Evaluation of Hot Deformation Properties of Aluminum Matrix Composites Reinforced with Spray-Formed Ceramic Particles

Process Prediction of Selective Laser Sintering Based on Heat Transfer Analysis for Polyamide Composite Powders

Multi-pass Layup Process for Thermoplastic Composites Using Robotic Fiber Placement

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Modeling of Manufacturing Processes of Carbon Matrices Composites and Prediction of Mechanical Properties of Materials During the Process

Stochastic Reconstruction and Microstructure Modeling of SMC Chopped Fiber Composites

Coupling of injection molding process to mechanical properties of short fiber composites: A through process modeling approach

Micromechanical Predictions on Elastic Moduli of a Short Fiber Composite with Arbitrary Geometric Combination

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing

Multiscale Collaborative Optimization of Processing Parameters for Carbon Fiber/Epoxy Laminates Fabricated by High-Speed Automated Fiber Placement

Experimental and numerical analysis of the consolidation process for additive manufactured continuous carbon fiber-reinforced polyamide 12 composites

Microstructure generation and full-field multi-scale analyses for short fiber reinforced thermoplastics: Application to PA66GF composites

Intelligent multiscale simulation based on process-guided composite database

LS-DYNA Machine Learning-based Multiscale Method for Nonlinear Modeling of Short Fiber-Reinforced Composites

Tensile and Compression Strength Prediction and Validation in 3D-Printed Short-Fiber-Reinforced Polymers

The fabrication of long carbon fiber reinforced polylactic acid composites via fused deposition modelling: Experimental analysis and machine learning