Abstract:The effect of different type of heteropolyacid/Zr-MCM-41 catalysts on the catalytic amination of glycerol with dimethylamine to produce Dimethylamino-3-propanal was researched. Under the premise of their respective optimum loading amount, the specific surface area, pore volume and pore size of the H6P2W18O62/Zr-MCM-41(Cat-2) were higher than those of the H3PW12O40/Zr-MCM-41(Cat-1). Cat-1 exhibited more total acidity than that of Cat-2, which resulted in the higher glycerol conversion of Cat-1 at the beginning of the reaction, but the coke deposited on Cat-1 was more than that of Cat-2. The amount of Bronsted acid sites and ratio of B/(B + L) on Cat-2 were higher than that of Cat-1. Therefore, the catalytic stability, selectivity and yield of Dimethylamino-3-propanal of Cat-2 were higher than those of Cat-1, which proved that the Bronsted acid sites are good for the catalytic amination of glycerol with dimethylamine to produce Dimethylamino-3-propanal. The leaching ratio of Cat-2 is slightly more than that of Cat-1, because H6P2W18O62 is more hydrophilic than H3PW12O40. However, the stability of Cat-2 is higher than that of Cat-1, therefore, the main reason for deactivation of catalyst is the formation of carbon deposit during this reaction. And the reaction pathway of catalytic amination of glycerol with dimethylamine was proposed. Furthermore, the reaction temperature, GHSV and the molar ratio of dimethylamine/glycerol were optimized on Cat-2 catalyst. Under the optimum reaction conditions: 300 degrees C, H6P2W18O62 loading of 20 wt%, GHSV of 3 h(-1), glycerol aqueous concentration of 10 wt%, dimethylamine aqueous concentration of 30 wt%, molar ratio of dimethylamine/glycerol of 2.5, the glycerol conversion, selectivity and yield of Dimethylamino-3-propanal were 95.6%, 80.8% and 77.2%, respectively.

Synthesis of N, N-dimethyl-n-butylamine with Tubular Reactor

The synthesis of N -ethyl- n -butylamine by amines disproportionation

Amination Of Aliphatic Alcohols Catalyzed By Cuo-Nio/Gamma-Al2o3

Amination of aliphatic alcohols catalyzed by CuO–NiO/ γ –Al 2 O 3

N-Methylation of amines with methanol in a hydrogen free system on a combined Al2O3–mordenite catalyst

Catalytic Synthesis of N,N,N',N'-tetramethylethylenediamine in Fixed-Bed Reactor

Catalytic Synthesis of N-Methyl-Piperazine in Fixed Bad Reactor

Synthesis of N-Methylmorpholine over the Catalyst Cu-Ni-Co/Al2O3 in the Gas Phase

N -Alkylation of Ethylenediamine with Alcohols Catalyzed by CuO-NiO/ Γ -Al 2 O 3

One Pot Synthesis of N-ethylaniline from Nitrobenzene and Ethanol

Catalytic amination of diethylene glycol with tert‐butylamine to tertiarybutylaminoethoxyethanol over NiCu/Al 2 O 3 catalysts: Facilitation of NiCu alloy

Catalytic amination of diethylene glycol with tert‐butylamine to tertiarybutylaminoethoxyethanol over NiCu/Al2O3 catalysts: Facilitation of NiCu alloy

Efficient selective combustion of n-butylamine on hierarchical Cu-Mn/SAPO-34 catalysts: the effect of mesoporosity and acidity

Rationally Engineering a CuO/Pd@SiO2 Core-Shell Catalyst with Isolated Bifunctional Pd and Cu Active Sites for N-Butylamine Controllable Decomposition

N-Butylamine Decomposition over Hierarchical Porous Copper–Manganese Composite Oxides: Overcoming the Limitation Between Activity and N2 Selectivity

Catalytic Amination of Glycerol with Dimethylamine over Different Type Ofheteropolyacid/zr-Mcm-41 Catalysts

Amination of n‐hexanol to n‐hexylamine over RuNi bimetallic catalyst

Selective N-Monomethylation of Amines Using Co2/H2 Catalyzed by High-Activity Cu–Zrox Interface on Sba-15

Magnetically Induced Amination of Alcohols using MNi@Cu (M = Fe, Co) Nanoparticles as Catalysts

Enhancing the Amination Reaction of 4-Nitrochlorobenzene in a Tubular Reactor

Catalytic amination of 1,6-hexanediol for synthesis of N, N, N', N'-tetramethyl-1,6-hexanediamine over Cu/Ni/Zn catalysts