Abstract:In this paper, the competing requirements of material strength, casting formation and residual stress are considered in the design of a large bulkhead integral isothermal forging die using a design approach that incorporates an outer ring plus a die body. Thermal stress assembly was conducted to resolve the various manufacturing issues encountered in the production of this large-scale casting. This paper also proposes a design method for an expansion joint and material-saving holes to homogenize the cross-sectional thickness of the casting die by solving problems associated with defects and hot cracking during the casting process. The finite element method was used based on the equivalent liquid level descending method, the Niyama criterion, etc., to analyze the pouring of the sand model with different risers to choose the casting process. To resolve the occurrence of hot cracks during production, the design was optimized and the process was improved in combining with the simulation analysis result, after which carrying out another finite element analysis and by re-verifying the production process again. The results show that the simulated porosity, shrinkage and stress distribution are in accord with the practical production status. Based on the mechanical properties and a microstructure analysis, the tension strength of the K3 casting die at 950 °C is approximately 635 MPa, and the microstructures are typical dendrites. However, through the simulation, practical production, and analysis of the mechanical properties and microstructure, the die design method proposed in this paper offers benefits in solving casting forming problems and hot cracking of an integral oversized titanium bulkhead casting die, and a K3 superalloy die with a weight of 7.8 tons was successfully cast.

Optimization of the Cooling System of Die for Besturn B50 Clutch Shell

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

Die Casting Die Design and Process Optimization of Aluminum Alloy Gearbox Shell

Study on Cooling Channel Arrangement of High-Pressure Casting Die for Box-Like Workpieces

Optimization of V-Process for Cast-Iron Boiler Plate

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Design of Cooling System for Narrow Area of Automotive Injection Mold Based on Computer Technology

Automobile Clutch Shell Shaping Technology and Mould Design

Optimization of Low-Pressure Die Casting Process with Soft Computing

Optimization and Design Based On Numerical Simulation of AZ91D Die Casting Gating and Runner System

Casting Process Design of Automobile Clutch Gear Die Castings

Study on a CAD/CAE system of die casting

Parameter Optimization of Cooling System for Hot Stamping Die Based on Segmented Model

CAE analysis-based optimization design of the cooling system for injection mold

Casting Design Optimization Using Numerical Simulation of Precision Forging Die for Large Titanium Alloy Integral Bulkhead

Optimization of Casting System Structure Based on Genetic Algorithm for A356 Casting Quality Prediction

Optimized Design for a Combined Die with Two Stress Rings in Cold Forging Considering Thermal-Mechanical Effects

Die-Casting Die Design Based on the Application of Cae Simulation