Abstract:Steel plate shear walls (SPSWs) have been widely employed in practical engineering projects. The steel plates inevitably endure axial loads due to the gravitational forces and structural settling. However, vertical pre-compressive loads have detrimental effects on the buckling behavior and shear resistance of the steel plates. Instead of strengthening the SPSWs to resist the vertical loads, a new type of vertically-flexible stiffened steel plate shear wall (VFS-SPSW) is proposed to minimize these adverse effects. The incorporation of hollow steel tube reduces the vertical compressive stiffness of the VFS-SPSW, leading to a decrease in the proportion of axial compressive loads transmitted to the steel plate wall from the boundary frame. Consequently, this feature facilitates the installation of VFS-SPSW without the necessity of awaiting the completion of the upper structure. In this paper, finite element (FE) analysis is conducted to obtain a threshold out-of-plane bending stiffness ratio for the stability of the VFS-SPSW. Subsequently, a formula for threshold out-of-plane bending stiffness ratio is proposed, including parameters of the ratio of torsional to bending stiffness and aspect ratio of the subpanel. Then, the anchoring mechanism of hollow steel tube to the tensile field of the steel plate is investigated. The threshold in-plane anchor stiffness ratio is defined to ensure the full development of the tension field in the steel plate. A formula for predicting this ratio is proposed by theoretical and numerical analysis. Finally, the reduction factor of vertical compressive stiffness for the VFS-SPSW at the threshold in-plane anchor stiffness ratio is calculated. The results indicate that the vertical compressive stiffness of the VFS-SPSW, which meets the threshold stiffness design requirements, can be decreased to below 50% of the traditional stiffened SPSW, while ensuring that the reduction in ultimate shear stress remains within the limit of 5%.

Analysis of Controllable Stress Distribution and Optimal Design of Flat Steel Ribbon Wound Pressure Vessel

CONTROLLABLE STRESS ANALYSIS AND DESIGN OF FLAT STEEL RIBBON WOUND PRESSURE VESSEL

Optimal Winding Conditions of Flat Steel Ribbon Wound Pressure Vessels with Controllable Stresses

Stresses Controllable Analysis and Optimal Design of Unique High Pressure Vessel Applied in Hydrogen Charge Station

Research on Reasonable Winding Angle of Ribbons of Flat Steel Ribbon Wound Pressure Vessel

Mechanical Analysis of Carbon Fiber Wound High Pressure Hydrogen Storage Vessel and Prestress Control in Manufacturing Process

Optimal Control of Cylinder Wall's Stresses of Composite Material High-pressure Hydrogen Storage Vessel

Hydrogen Environment Fatigue Test System Development of High Pressure Hydrogen Storage Vessels

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Design criteria for the unique flat steel ribbon wound pressure vessel

Experimental Investigation on the Deformation and Damage of Steel Ribbon Wound Vessel for Hydrogen Storage under External Impact and Blast Loading

New concepts on the interfacial friction behaviour between flat steel ribbon layers

Design of horizontal stiffeners for stiffened steel plate walls in compression

Design of Vertically Stiffened Steel Plate Walls under Combined Uniaxial Compression and Shear Loads

Design Philosophy of Flat Ribbon Wound Layered Pressure Vessel

Mechanical Analysis and Optimal Control of Hydrogen Storage Vessels with Carbon Fiber Filament Wound Aluminum Liner

Shear Stability and Resistance Design of Novel Vertically-Flexible Stiffened Steel Plate Shear Walls

Numerical analysis of process induced stress field for composite filament wound vessel with metal liner

Heat-transfer Analysis of Flat Steel Ribbon-Wound Cryogenic High-Pressure Vessel

Stress Analysis and Evaluation of Special Shape Pressure Pipe

Analysis on the rigid-plastic dynamic response of two-walled pressure vessels with flat-wound steel ribbons