Abstract:The chloride salts have great potential used as high-temperature thermal energy storage (TES) medium for the concentrated solar power system. In this study, LiCl, KCl and CaCl 2 were selected as energy storage materials in order to further broaden the working temperature of ternary chloride salt and improve its energy storage density. The new high-temperature energy storage ternary chloride composed of LiCl, KCl, and CaCl 2 was developed based on the phase diagram generated by FactSage. Three components of LiCl-KCl-CaCl 2 with the mass ratio of 37.85%-53.38%-8.77%, 30.90%-13.82%-55.28% and 1.78%-18.61%-79.61% were developed, of which the corresponding melting temperature ( T m ) 340.93, 433.57 and 626.85°C, respectively, was obtained either. Considering that T m of the third group of salts was too high, only the first two groups of salts were tested. DSC test showed that the actual melting point was only 0.46% and 1.64% different from the melting point predicted by Factsage. The thermal properties of the two ternary chloride salts were also compared. The solid and liquid-specific heat of ternary salts was determined by DSC using sapphire as the standard reference. The vapor pressure and decomposition temperature of ternary chloride salts were investigated. The results showed that the vapor pressure of salt 1 was almost constant below 650°C by FactSage. Meanwhile, the TG results showed that the upper working temperature of salt 1 was 650°C under the air atmosphere. In addition, the ternary chloride salts after short-term cycling still exhibited excellent thermal properties, which revealed that these good thermal properties make them have broad application prospects in high-temperature thermal energy storage systems.

Test of thermal physics and analysis on thermal stability of high temperature molten salt

Thermal insulation for a high temperature molten salt storage tank in a CSP plant

Design of new molten salt thermal energy storage material for solar thermal power plant

Experimental Test of Properties of KCl–MgCl2 Eutectic Molten Salt for Heat Transfer and Thermal Storage Fluid in Concentrated Solar Power Systems

Thermal performance and economic evaluation of NaCl–CaCl2 eutectic salt for high-temperature thermal energy storage

Experimental Study on the Thermal Stability of a New Molten Salt with Low Melting Point for Thermal Energy Storage Applications

Performance Design of High-Temperature Chloride Salts as Thermal Energy Storage Material

Thermophysical Properties Experimentally Tested for NaCl-KCl-MgCl2 Eutectic Molten Salt as a Next-Generation High-Temperature Heat Transfer Fluids in Concentrated Solar Power Systems

Thermal Stability Calculation and Experimental Investigation of Common Binary Chloride Molten Salts Applied in Concentrating Solar Power Plants

Review on Thermophysical Properties and Corrosion Performance of Molten Salt in High Temperature Thermal Energy Storage

Thermal properties of KCl–MgCl2 eutectic salt for high-temperature heat transfer and thermal storage system

Research and Application of Molten Salts for Sensible Heat Storage

Investigation on thermal performance of eutectic binary nitrate-carbonate molten salt under thermal shock condition

Preparation And Experimental Study Of Mixed Carbonates With High Maximum Using Temperature

Stabilization of molten salt materials using metal chlorides for solar thermal storage

Thermal transport and storage performances of NaCl–KCl–NaF eutectic salt for high temperatures latent heat

Experimental study of viscosity of new kind of molten salt with low melting point

Thermodynamic calculations and experimental studies of ternary molten salts for high-temperature thermal energy storage

Thermal performance analysis of molten salt based on a novel experimental rig

Study on the preparation and thermal properties of binary mixed chloride salts

Structure and Thermophysical Properties of Molten Calcium-Containing Multi-Component Chlorides by Using Specific BMH Potential Parameters