Abstract:Fault dislocation severely threatens the safety of a tunnel structure. Formerly, researchers mainly engaged in the mechanical response of mountain tunnels crossing the fault fracture zone. In contrast, few studies have focused on the structural stress characteristics and joint deformation of the cross-fault shield tunnels. There is an apparent difference between segmental tunnels and mountain tunnels with respect to mechanical properties. In the current study, a three-dimensional numerical model of cross-fault segmental tunnels is established based on the theory of concrete plastic damage constitutive relations using the finite element program ABAQUS. The numerical calculation results are compared with the model test results for validation. Subsequently, the relevant factors affecting the mechanical response of the shield tunnel crossing the active fault are analyzed. The results illustrate that when normal fault dislocation occurs, the shield tunnel structure is initially damaged appearing in the circumferential joints, which is prone to large tension deformation. Otherwise, when reverse faulting occurs by the same displacement, the shield tunnel structure is initially damaged at the arch haunch of the segments, and the deformation of the longitudinal joints is relatively slight. Under the same fault displacement, the bearing capacity of the segmental lining subjected to the reverse fault dislocation is more significant than that of the normal fault dislocation. Both the soil elastic modulus and the vertical distance between the top of the fault and the tunnel exert a considerable impact on the structural damage of the segmental tunnels, bolt stress, and joint deformation. The fault dip angle does not affect the mechanical characteristics of the shield tunnel structure when subjected to normal fault displacement. In reverse faulting cases, with the increase of the fault dip angle, the tunnel structural failure mode transforms from the transverse compression failure of the segments to the shear failure of the circumferential joints.

Analysis on Stress and Strain of Shield Tunnel Lining Structure with Cracks

Numerical Study on the Longitudinal Deformation Pattern of Shield Tunnel

Interface Failure of Segmental Tunnel Lining Strengthened with Steel Plates Based on Fracture Mechanics

Numerical simulation and analysis of crack disease in tunnel lining structure

Numerical Simulation of Highway Tunnel Composite Lining Temperature Stress

Numerical Investigation on Cracking Behavior of Shield Tunnel Lining Subjected to Surface Loading: A Parametric Study

Analysis of Forces and Deformation Rule of Existing Shield Tunnel Caused by Ground-heaped Load

Full-scale Loading Test for Shield Tunnel Segments: Load-bearing Performance and Failure Patterns of Lining Structures

Semi-analytical solution for internal forces of tunnel lining with multiple longitudinal cracks

Analytical Solution for Mechanical Properties of Tunnel Influenced by Longitudinal Pressure and Reinforced Steel Plate

Influence of cracks at the invert on the mechanical behavior of the tunnel structures

Analysis of Superimposed Stress of Surrounding Soil Due to Shield Tunneling

Cracking characteristics and mechanism of entrance section in asymmetrically-load tunnel with bedded rock mass: A case study of a highway tunnel in southwest China

Study on supporting time of tunnel lining in thin-layered rock mass

Study on deformation characteristics of composite lining structure of shield tunnel

Study on mechanism of lining cracking and distribution rule of void cracks behind lining based on XFEM

Structural Stress Characteristics and Joint Deformation of Shield Tunnels Crossing Active Faults

Study on cracking behavior of tunnel linings with the diseases of void and lining insufficient thickness

Study on Crack Development of Concrete Lining with Insufficient Lining Thickness Based on CZM Method

Study on cracking behaviors of shield tunnel segment with annular interfacial unevenness under jacking thrust force

Model test on the behavior of tunnel linings under earth pressure conditions and external water pressure