Abstract:Developing advanced onsite wastewater treatment systems (OWTS) requires accurate and consistent water quality monitoring to evaluate treatment efficiency and ensure regulatory compliance. However, off-line parameters such as chemical oxygen demand (COD), total suspended solids (TSS), and Escherichia coli (E. coli) require sample collection and time-consuming laboratory analyses that do not provide real-time information of system performance or component failure. While real-time COD analyzers have emerged in recent years, they are not economically viable for onsite systems due to cost and chemical consumables. This study aimed to design and implement a real-time remote monitoring system for OWTS by developing several multi-input and single-output soft sensors. The soft sensor integrates data that can be obtained from well-established in-line sensors to accurately predict key water quality parameters, including COD, TSS, and E. coli concentrations. The temporal and spatial water quality data of an existing field-tested OWTS operated for almost two years (n = 56 data points) were used to evaluate the prediction performance of four machine learning algorithms. These algorithms, namely, partial least square regression (PLS), support vector regression (SVR), cubist regression (CUB), and quantile regression neural network (QRNN), were chosen as candidate algorithms for their prior application and effectiveness in wastewater treatment predictions. Water quality parameters that can be measured in-line, including turbidity, color, pH, NH4 +, NO3 –, and electrical conductivity, were selected as model inputs for predicting COD, TSS, and E. coli. The results revealed that the trained SVR model provided a statistically significant prediction for COD with a mean absolute percentage error (MAPE) of 14.5% and R 2 of 0.96. The CUB model provided the optimal predictive performance for TSS, with a MAPE of 24.8% and R 2 of 0.99. None of the models were able to achieve optimal prediction results for E. coli; however, the CUB model performed the best with a MAPE of 71.4% and R 2 of 0.22. Given the large fluctuation in the concentrations of COD, TSS, and E. coli within the OWTS wastewater dataset, the proposed soft sensor models adequately predicted COD and TSS, while E. coli prediction was comparatively less accurate and requires further improvement. These results indicate that although water quality datasets for the OWTS are relatively small, machine learning-based soft sensors can provide useful predictive estimates of off-line parameters and provide real-time monitoring capabilities that can be used to make adjustments to OWTS operations.

Study of Self-Calibration for Ion Sensor Based on LS-SVM

Least Squares Support Vector Machines Based Soft Sensor Modeling of Nutrient Concentration for Multiplex Fertilizer Device

Application Of Least-Squares Support Vector Machines For Quantitative Evaluation Of Known Contaminant In Water Distribution System Using Online Water Quality Parameters

Calibrating Low-Cost Sensors by a Two-Phase Learning Approach for Urban Air Quality Measurement

Rapid Detection of Chemical Oxygen Demand Using Least Square Support Vector Machines

A SEVA Soft Sensor Method Based on Self-Calibration Model and Uncertainty Description Algorithm

Study on Nonlinear Multifunctional Sensor Signal Reconstruction Method Based on LS-SVM

Design and application of soft sensors in rural sewage treatment facilities

Online Classification Of Contaminants Based On Multi-Classification Support Vector Machine Using Conventional Water Quality Sensors

SVM Based Soft Sensor for Antibiotic Fermentation Process

Calibration and Inter-Unit Consistency Assessment of an Electrochemical Sensor System Using Machine Learning

Development of Machine Learning Models for Ion-Selective Electrode Cation Sensor Design

Multi-function self-validating water quality monitoring sensor based on relevance vector machine

Research and Application on a Novel Self-validating Soft Sensor

In Situ Drift Monitoring and Calibration of Field-Deployed Potentiometric Sensors Using Temperature Supervision

Smart Water Quality Monitoring with IoT Wireless Sensor Networks

The least-square support vector regression model for the dyes and heavy metal ions removal prediction

A Probabilistic Self-Validating Soft-Sensor with Application to Wastewater Treatment

Development of a Soft Sensor Using Machine Learning Algorithms for Predicting the Water Quality of an Onsite Wastewater Treatment System

On Data-Driven Self-Calibration for IoT-Based Gas Concentration Monitoring Systems

Water Quality Monitoring and Evaluation System Based on Wireless Sensor Network and LS-SVM Method