Abstract:On the basis of introducing the implementation method of variable fuel injection rate, the calculation model of a single-cylinder ultra high pressure common rail diesel engine was built, and the accuracy of this model was verified with experiments; then the effects of different fuel injection rates and fuel injection advanced angles on the performance of the ultra high pressure common rail diesel engine were analyzed with this model. The results show that the variable fuel injection rate can be realized by adjusting the opening time of electric-controlled pressure amplifier and injector solenoid valve in the ultra high pressure common rail system. With the lagging of pressurization time, the cylinder pressure, cylinder temperature, heat release rate and NOx emissions of the diesel engine decrease, while the soot emission rises. The ultra high pressure rectangle injection rate can make the diesel engine acquire best power and economy performance. With the increasing of fuel injection advanced angle, the cylinder pressure, cylinder temperature, heat release rate and NOx emission of the diesel engine rise, while the soot emission decreases first and then rises, the too small or too large fuel injection advanced angle can both reduce the power and economy performance of the diesel engine. The high fuel injection rate that matches small fuel injection advanced angle can improve power output and reduce fuel consumption of the diesel engine, and there is an optimal fuel injection advanced angle for each fuel injection rate to make the diesel engine performance achieve the best.

Research of Fuel Injection Timing Control Strategy for EUP Diesel Engine

Research on Injection Control Strategy for High Pressure Common Rail Diesel Engine

Study on injection characteristics of diesel and DME

Research of Electronic Hydrogen Injection Control Strategy on Hydrogen-fueled Engines

Research and development of an electronically controlled pump-pipe valve-injector fuel injection system

Design of ECU for Common Rail System of Diesel Engine and Study of Injection Characteristics

Injection Strategy Optimization for a Multiple Premixed Compression Ignition Engine Based on Taguchi Method

Research on the Control and Performance of Working State of Diesel/LPG Dual-fuel Engine

Simulation of the Effect of Fuel Injection Rate that Matches Fuel Injection Advanced Angle on the Performance of Ultra High Pressure Common Rail Diesel Engine

Effect of Injection Strategy on Emission Characteristics of Compression Ignition Engine Fueled with Blended Fuel

Effect of Pilot Injection Strategy on Performance of Diesel Engine under Ethanol/F-T Diesel Dual-Fuel Combustion Mode

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Investigation on the combined influence mechanism of port water injection timing, injection pressure and ignition timing on natural gas engine performance based on the Taguchi method

Crank Event Based Fuel Injection and Spark Ignition Timing Control Strategy for SI Engines

Study on Egr Control Strategy for Vehicle Diesel Engine Based on Experiment

Effects of different injection timing on the performance, combustion and emission characteristics of diesel/ethanol/n-butanol blended diesel engine based on multi-objective optimization theory

Research on Timing Synchronizing Control Strategy of Grouping Injection and Ignition for Gasoline Engine

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine

Simulation Research on Post-Injection of Electronically Controlled Heavy-Duty Diesel Engine

Nonlinear Model Predictive Control of Integrated Diesel Engine and Selective Catalytic Reduction System for Simultaneous Fuel Economy Improvement and Emissions Reduction