Abstract:Low-cycle fatigue (LCF) behavior of nickel-based precipitation-strengthened superalloy GH4145/SQ was investigated systematically under fully reversed total strain amplitude control conditions at 538°C in laboratory air. It was shown that the alloy exhibited a pronounced initial fatigue hardening followed by continuous fatigue softening to failure at high strain amplitudes, while at low strain amplitudes the initial hardening was followed by a well-defined saturation stage. Microstructure observations using optical and transmission-electron microscopy revealed that slip band density increased with increasing total strain amplitudes and the size of the γ′precipitates tended to reduction due to repeated shearing by the dislocations with continuous cyclic straining. The above changes in microstructures during cycling were essentially responsible for the fatigue hardening–softening behavior of the alloy. Both optical and SEM micrographs indicated that at low strain amplitudes crack propagation was basically transgranular, while at high strain amplitudes crack propagation was essentially intergranular. Bilinear behavior with a change of slope at a plastic strain amplitude of about 0.2pct was observed in cyclic stress–strain (CSS), Coffin–Manson (C–M) and plastic strain energy–life plots. A change in the number of operating slip systems and the fracture modes with the strain amplitude employed was used to explain this two-slope characteristic. In both the companion specimens test (CST) and the incremental step test (IST) methods the alloy exhibited non-masing type behavior. It was suggested that, for the first approximation, the half-life plastic strain energy could be calculated directly according to the equation without reckoning in the non-masing behavior.

Wearless Scratch on NiTi Shape Memory Alloy Due to Phase Transformational Shakedown

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Temperature dependence of tribological properties in NiTi shape memory alloy: A nanoscratching study

An atomistic study of effects of temperature and Ni element on the phase transition and wear behavior of NiTi shape memory alloy

Nano-indentation and nano-scratching of pure nickel and NiTi shape memory alloy thin films: an atomic-scale simulation

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Wear resistance of NiTi alloy after surface mechanical attrition treatment

Surface Mechanical Attrition Treatment Induced Phase Transformation Behavior in NiTi Shape Memory Alloy

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

Abnormal superelastic cyclic behavior and stress-induced martensitic transformation mechanism of NiTi alloy with R phase

Friction and Wear Resistance of Nanostructured TiNi Shape Memory Alloy

Thermal effects on wear behavior of additively manufactured NiTi shape memory alloys

Unraveling the Subsurface Damage and Material Removal Mechanism of Multi-Principal-Element Alloy FeCrNi Coatings During the Scratching Process

Whole-life transformation ratchetting and fatigue of super-elastic NiTi Alloy under uniaxial stress-controlled cyclic loading

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

Tribology behaviors of Ti–Ni51.5 at% shape memory alloy with different microstructures and textures

In Situ Synchrotron Radiation X-ray Diffraction Study on Phase and Oxide Growth during a High Temperature Cycle of a NiTi-20 at.% Zr High Temperature Shape Memory Alloy

Tribological behaviors of nanotwinned Al alloys

Surface hardening of NiTi shape memory alloy induced by the nanostructured layer after surface mechanical attrition treatment.

Tribological Behavior of an Amorphous Zr20Ti20Cu20Ni20Be20 High-Entropy Alloy Studied Using a Nanoscratch Technique