Abstract:In this paper, we have theoretically and experimentally demonstrated a novel large-mode-area multi-resonant all-solid photonic bandgap fiber (AS-PBGF). Based on the combination of the multi-resonant structure and leakage channel, the structural parameters are specifically designed for conventional applications of fiber lasers around 1 μm wavelength. Through the stack and draw technique, the fiber is fabricated successfully and the hexagon core is measured to be 46 μm in the corner-to-corner direction. The transmission spectrum exhibits a broad bandwidth from 970 nm to 1180 nm in the 3rd photonic bandgap (PBG). Bending loss lower than 0.1 dB/m with a 5-m-length fiber is obtained in the case of bending radius R > 25 cm. By employing the spatially and spectrally resolved imaging (S2) method, robust single-mode (SM) operation of the fiber is verified within the whole PBG. In addition, we also report a phenomenon about the abnormal variation of M2 within the low loss region of the 3rd PBG. The evolution of beam quality within the 3rd PBG appears as a U-shaped curve rather than a constant. Based on the measured M2 and S2 results, a preliminary conclusion about the relationship between the beam quality and SM characteristics in AS-PBGF, which is quite different from that in conventional SIFs, is demonstrated experimentally for the first time.

Leakage Loss of Solid Core Photonic Band Gap Fibers

A Single-Mode Polarization Maintaining Hollow Core Photonic Bandgap Fiber

Confinement loss in solid-core photonic bandgap fibers

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Dispersion of Square Solid-Core Photonic Bandgap Fibers.

Amplification Properties of Erbium-Doped Solid-Core Photonic Bandgap Fibers

PMD Measurement of Hollow-Core Photonic Bandgap Fiber by Investigating Power Penalty of Optically Generated Microwave Signals

Transmission Characteristics Of Air Core Photonic Band Gap Fiber

Large-Mode-Area Multi-Resonant All-Solid Photonic Bandgap Fiber with Low Bending Loss and Robust Single-Mode Operation

Optical Properties of Solid Core Honeycomb Photonic Crystal Fiber with Different Doping Levels

Understanding All-Solid Honeycomb Photonic Bandgap Fibers

Hybrid structure polarization-maintaining hollow-core photonic bandgap fiber with anti-resonant tubes and silicon layers

Design of photonic band gap fibers with suppressed higher-order modes: towards the development of effectively single mode large hollow-core fiber platforms

High Birefringence Photonic Bandgap Fiber with Elliptical Air Holes

Large Negative Dispersion in Square Solid-Core Photonic Bandgap Fibers

Mode Couplers and Converters Based on Dual-Core Hollow-Core Photonic Bandgap Fiber

Loss properties of all-solid photonic band gap fibers with an array of rings

Solid Photonic Bandgap Fibres and Applications

Low-loss Polarization-Maintaining THz Photonic Crystal Fiber with a Triple-Hole Core.

All solid photonic bandgap fiber based on an array of oriented rectangular high index rods.

High-Order Mode Characteristics of a 7-Cell Hollow-Core Photonic Bandgap Fiber