Abstract:A system was developed for the treatment of low-pollution sewage with poor biodegradability and a low ratio of chemical oxygen demand (CODCr) to nitrate-nitrogen (COD/NO3 -N (C/N)) ratio to achieve high efficiency. This system combines the anaerobic-oxic (AO) process with the biological aerated filter (BAF) and introduces the Fenton advanced oxidation process. A pilot test system was established, and feasibility investigations were conducted using a continuous flow of 500 L/h. The results showed that the optimal conditions for removing nitrate from sewage were achieved with a C/N ratio of 5.5-6 and a hydraulic retention time (HRT) of 4 h. Under these conditions, the average nitrate removal efficiency was 83.36%, and the average concentration of total nitrogen (TN) in the effluent was reduced to 6.68 mg/L. Additionally, the Fenton oxidation treatment was effective in reducing the COD content of sewage, with an average removal efficiency of 82.47% and a decrease in CODCr from 55.24 mg/L to 9.68 mg/L. The combined process successfully met the stringent discharge standards after advanced treatment. Microbial community analysis revealed that the dominant genera in anoxic BAFs were Trichococcus, Comamonadaceae, Lentimicrobium, and Thauera, while the dominant genera in aerobic BAFs were mainly Acinetobacter, Thiothrix, Gemmobacter, and Caldilineaceae. The synergistic effect of various nitrifying and denitrifying bacteria in BAFs effectively removed nitrate from the sewage. Furthermore, GC-MS analysis indicated that the Fenton oxidation significantly reduced the concentration of refractory organic compounds in the sewage, including long-chain organic compounds and acrylic acid maleic acid copolymer (MA/AA). After upgrading and renovating the factory's sewage treatment facilities, the impact of the discharged effluent on the receiving drainage basin will be minimized.

Study on Treatment of Nylon-6 Wastewater by Using Hydrolysis Acidification/Two-stage Bio-contact Oxidation Process

Hydrolytic acidification-contact oxidation-flocculation and sedimentation process for printing and dyeing wastewater treatment

Treatment Project of Organophosphorus Pesticide Wastewater

Tannery wastewater treatment with biological treatment combined process

Experimental study on the treatment process of wastewater in a printing and dyeing industrial park

Treatment of alkaline wastewater from synthetic rubber production by coagulation and biological contact oxidation

Study on Treatment of Polyacrylonitrile Fiber Wastewater by Coagulation-Anaerobic-Anoxic-Aerobic Process

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

Combined Process of Iron-carbon Reduction, Biological Degradation and Ozonation for Treatment of Chloronitrobenzene Wastewater

Advanced Treatment of Low-Pollution and Poor Biodegradability Sewage by Combined Process

Design and Operation of Treatment of Textile Printing and Dyeing Wastewater by Coagulation-hydrolytic Acidification-Aerobe Process

Treatment of wastewater from acrylonitrile industries with combined processes of adsorption oxidation, nanofiltration and adsorption

An Example of Wastewater Treatment Engineering of a Special Resin Production Enterprise

Treatment of mixed chemical wastewater by a two-stage A/O process for elimination of COD nitrogen and toxic matters

Treatment of Printing and Dyeing Wastewater by Anaerobic/Anoxic/Aerobic Biological Process

Toxicity reduction in an industrial nitro-aromatic wastewater plant: an assessment and a proposed improvement.

Treatment of Landfill Leachate Reverse Osmosis Concentrates by Advanced Oxidation-Heterotrophic Nitrification–Aerobic Denitrification Combination process

Pretreatment of Wastewater in Amine C Acid Manufacture by Coagulation-Catalytic Oxidation

Treatment of High-concentration Polyester Wastewater by EGSB-MBBR Process

Experimental research on the removal of nitrogen from PU synthetic leather wastewater by combined process anaerobic MBBR and aerobic MBR

Hydrolytic Acidification/Three-stage Biological Contact Oxidation Process for Treatment of Slaughterhouse Wastewater