Abstract:Metal-foam materials have been used increasingly in industry for their low-density, high-toughness and high impact resistance properties. Understanding the macro-scale mechanical properties of these materials is essential to evaluate their actual performance and thus to optimize the structures and properties accordingly. Synchrotron radiation X-ray microtomography technique is a promising method to study 3D structures at small length scales, which provides high spatial resolution and allows the researchers to observe the change of structures/features in situ without destroying the original objects. In this work, the real 3D structure of closed-cell aluminum foam was obtained by using synchrotron radiation X-ray microtomography. The reconstructed 3D model of the foam was further utilized as input for the subsequent mechanical study to investigate the localized deformation behaviors and evolution process of the foam under longitudinal quasi-static uniaxial compressive loading. By analyzing the simulated results, it is demonstrated that the deformation bands always initiate and propagate along the cell walls which are finally folded upon loading. And the large spherical cells are more susceptible to yielding, as well as to the stress concentration than the cells with other shapes. This finding is consistent with the experimental results.

Three Dimensional Microstructure Characterization of an Al-Zn-Mg Alloy Foam Using Synchrotron X-Ray Microtomography

Research on Microstructure Evolution and Deformation for Closed-Cell Aluminium Foams in Compression by SXR-CT Technique

Three Dimensional Microstructure and Image-Based Simulation of A Fly Ash/Al Syntactic Foam Using X-Ray Micro-Computed Tomography

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Three dimensional microstructural characterization of fly Ash/Al foam composite by X-ray microtomography

Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT

Mechanical Properties of Aluminum Foam Based on Synchrotron Radiation Computed-tomography

Pore nucleation and growth in aluminium alloy foams analysed by X-ray tomoscopy

Using X-ray tomoscopy to explore the dynamics of foaming metal

Internal microstructure evolution of aluminum foams under compression

3D visualization and characterization of nano structured materials

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF AMORPHOUS Al–Cu–Ti METAL FOAMS SYNTHESIZED BY SPARK PLASMA SINTERING

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

Three Dimensional (3D) Microstructural Characterization and Quantitative Analysis of Solidified Microstructures in Magnesium-Based Alloys

3D Characterization of Ultrasonic Melt Processing on the Microstructural Refinement of Al-Cu Alloys Using Synchrotron X-ray Tomography

Application of image analysis to quantify the microstructure features of cenosphere/Al syntactic foams

Microstructure and compression behavior of cenosphere filled aluminum syntactic foams

Synthesis of a novel Al foam with a periodic architecture by introducing hollow Al tubes and Al/Mg powders

3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys by synchrotron X-ray tomography

High temperature and mesostructure effect on aluminum foam compression responses