Abstract:SUMMARY When a seismic wave propagates in a fluid-saturated porous medium, a relative movement forms between the solid and the fluid and induces an electric current due to the electronic double layer. As a result, two kinds of seismoelectric coupling responses are generated in this procedure: the localized electric/magnetic field and interfacial electromagnetic wavefield. One important potential application of these two seismoelectric conversions is used for measuring formation P and S waves in well logging. Considering that the strong collar wave seriously affects the velocity measurements of formation P and S waves in current acoustic logging while drilling (LWD), the seismoelectric LWD method, which combines seismoelectric conversion and acoustic LWD technique, was suggested to be a novel method in oil and gas exploration. The collar wave cannot induce any seismoelectric signal on the metal collar since there is no double layer formed on a metal surface. In this paper, acoustic and seismoelectric LWD measurements are conducted in the laboratory. We build a scaled multipole acoustic LWD tool to conduct acoustic measurements in a water tank and a sandstone borehole model. We also build a multipole seismoelectric LWD tool and record the seismoelectric signals induced with the same acoustic source. Then, we compare the recorded acoustic and seismoelectric signals by using the experimental data. The result indicates that the apparent velocities of seismoelectric signals are equal to the formation P- and S-wave velocities and the collar waves do not induce any visible electric signal in the full waveforms. We further analyse the mechanism of seismoelectric LWD by a quantitative comparison of the amplitudes between the inner collar wave and outer collar wave. The results show that the amplitude of outer collar wave decreases significantly when it radiates out of the tool, so that the seismoelectric signals induced by collar waves are too weak to be distinguished in the full waveforms of seismoelectric LWD measurements. Thus, the formation P- and S-wave velocities are detected accurately from the recorded seismoelectric LWD data. These results verify the feasibility of the seismoelectric LWD method for measuring acoustic velocities of the borehole formation.

Simulation of the Converted Electric Field During Acoustoelectric Logging

Simulation of Acousto-Electric Well Logging Based on Simplified Pride Equations

Simulation of the Borehole Quasistatic Electric Field Excited by the Acoustic Wave During Logging While Drilling Due to Electrokinetic Effect

Theoretical Simulation of Electroacoustic Borehole Logging in a Fluid-Saturated Porous Formation

Study on Numeric Simulation of Complex Resistivity Logging

Radiating and accompanying electromagnetic fields during acousto-electromagnetic logging

Theoretical Simulation of the Multipole Seismoelectric Logging While Drilling

The Ratio of the Acoustoelectric Field to the Acoustic Pressure in a Borehole and Its Dependence on Permeability

The Theoretical Simulation of the Seismoelectric Logging While Drilling Based on an Elastic Formation Model

Interface Detection of Near-Borehole Stratified Formation under Different Permeabilities Based on Seismoelectric Logs: A Finite-Difference Modeling

Experimental Measurements of Seismoelectric Signals in Borehole Models

Finite-difference Modeling of the Electroseismic Logging in a Fluid-Saturated Porous Formation

Component Wave Analysis of Borehole Seismoelectric Wavefields and Permeability Inversion from Seismoelectric Logs

Formulation of the Acoustically-Induced Electromagnetic Field in A Porous Formation in Terms of Hertz Vectors and Simulation of the Borehole Electromagnetic Field Excited by an Acoustic Multipole Source

Finite-difference modeling of seismoelectric logs

Modeling and Inversions of Acoustic Reflection Logging Imaging Using the Combined Monopole–dipole Measurement Mode

A Fast Algorithm for Simulation and Analysis of Wavefields in Acoustic Single-Well Imaging of Logging-While-drilling Considering Arbitrary Types of Sources

Wavefield simulation and analysis with the finite-element method for acoustic logging while drilling in horizontal and deviated wells

Influence of salinity interface on seismoelectric logging wave field

Experimental studies on the mechanism of seismoelectric logging while drilling with multipole source

Electrokinetic experimental studies in borehole model II : localized and radiated seismoelectric field