Performance analysis of trilobe equidistant polygon connection

HUANG Bin,LI Jie,SUN Qing-jun,WANG Le-qin

DOI: https://doi.org/10.3785/j.issn.1008-973X.2010.03.032

2010-01-01

Abstract:An accurate finite element method was set up for analysis of characteristics of trilobe equidistant polygon connection. In this method,the profile curves were fit through cubic spline curves,and a 2D FEM model with a one third triaxial symmetry was adopted. Besides,periodic constraints were exerted on the radial boundaries,and uniform tangential force was applied on the inner surface of wheel hub to simulate the torque,while the outer surface of the hub was fixed in the circumferential direction. Through a calculation example of the trilobe equidistant connection,the stress distribution characteristics were derived as follow:the contact stress shows an approximate triangular distribution while the contact angle scope spreads about one third of the entire domain. Friction,which plays an important role in the torque transmission process,does not change the distribution and rule of the contact stress. As the friction coefficient increases,the normal contact stress decreases prominently,thereby increases the capacity of profile connection. With the increase of the eccentricity,the contact area and the arm of normal contact force increases,while the normal contact force keeps falling despite that the proportion of friction taking up in the transmission torque shrinks correspondingly. In the process of the trilobe equidistant polygon connection,the separating zone of hub inner surface shows large tensile stress,while the contacting zone of the hub and the shaft endures large compressive stress.