Abstract:Boric acid is often added into coolant as neutron capture agent for pressurized water reactor, whose amount is influenced by its abundance and purity. Therefore, the preparation of enriched 10B boric acid with high purity is beneficial to nuclear industry. 10B is also used in developing tumor-specific boronated drugs in boron neutron capture therapy. The boronated drug can be administered to patient intravenously, intratumorally, or deposited at tumor site in surgical excision. Thus, enriched 10B boric acid is of practical significance in the field of medicine. Self-made boron trifluoride–methanol-complex solution was selected as one of the experimental reagents, and the preparation of 10B acid was realized by one-step reaction for the complexes with water and calcium chloride. The determination of electrical conductivity in reaction process proves that the optimum reaction time was 16–20 h. Furthermore, the effect of reaction time, ratio of calcium chloride to complex as well as the amount of water on the purity and yield of boric acid was investigated. Finally, the optimum reaction time was 20 h, the optimal solid–liquid ratio (molar ratio) was 3:1, and the amount of water was 1 L of deionized water for each mol of the complex. H2O2 was added in the reaction process to remove Fe2+. After recrystallization, IR spectra of 10B boric acid was measured and compared with standard to verify the product of boric acid. The feasibility of the preparation method was determined by the detection of XRD of boric acid. To observe the morphology by polarizing microscope, crystal structure was obtained. The purity of the final product is 99.95 %, and the yield is 96.47 %. The ion concentration of boric acid accords with the national standard of high purity, which was determined by ICP.

Preparation of high purity boric acid by complex crystallization

Preparation and characterization of 10B boric acid with high purity for nuclear industry

Preparation of barium sulfate submicro-particles with high purity by solventing-out process

PURIFICATION OF BORIC ACID

Reasonable Design and Controllable Growth of Instant Boric Acid

Boric acid recovery from wastewater by chromatographic separation and mathematical modeling

Phosphoric Acid Purification by Suspension Melt Crystallization: Parametric Study of the Crystallization and Sweating Steps

Synthesis and Characterization of Triisopropanolamine Borate

Preparation technology of high purity barium fluoride from ammonium salt

Agglomerated Technology for Amorphous Boron Powder

Purification of amorphous boron powder by using the soluble transformation of acid-insoluble boron magnesium compounds

High Purity Strontium Carbonate Prepared by Ultrasonic Technology

Glutaric Acid Purification by Coupled Solution Crystallization and Melt Crystallization

Preparation of boric acid and magnesium hydroxide from boron-rich slag by hydrochloric acid leaching method

Study on effects of additives on purifying phosphoric acid by crystallization

Purifying Technology of Ultra-fine Zirconium Diboride Powders

Influence of the Boric Acid on Sintering and Crystallization Behavior of the Fused Silica

Borax Preparation from Na-B-Si-containing Solution by Carbonation and Multi-Step Crystallization

The Hydrothermal Method of Preparing Boron–Saccharide Precursors for the Synthesis of Boron Carbide and Its Influence on the Morphology and Phase Composition of the Obtained Products

PREPARATION OF HIGH-PURITY ULTRAFINE BaTiO3 BY H2O2 OXIDATION HYDROTHERMAL COMBINED MEIHOD

Preparation of high-purity and nanometer-scale barium titanate powders