Abstract:Poly(3,4-ethylenedioxythiophene): poly (styrenesulfonic acid) (PEDOT: PSS) is one of the most successful conductive polymers, usually used as hole injecting layer in organic light-emitting devices. Due to low conductivity and unsatisfied work function (WF), the modification of PEDOT:PSS with some additives has been proved to be cost-effective. Perfluorinated ionomer (PFI) has been reported as an effective additive to improve the WF of PEDOT:PSS, increasing from 5.2 eV to 5.95 eV with a recipe of PEDOT(1):PSS(6):PFI(25). However, the strong hydrophobicity of PFI has limited the choice of the organic solvents used to fabricate the uniform emitting layer on the modified PEDOT:PSS. To address this issue, the polymers were introduced as the additive of the emitter to overcome the non-uniform morphology on the hydrophobic surface of PEDOT:PSS:PFI. A conventional fluorescent polymer poly(9-vinylcarbazole) (PVK) and a thermally activated delayed fluorescent polymer (4-(2-(9-(heptadecan-9-yl)-6-phenyl-9H-carbazol-3-yl)-9,9-dihexyl-7-phenylacridin-10(9H)-yl)phenyl) (phenyl)methanone (PABPC2.5) were compared in parallel to reveal the influence of the polymer additive of the emitters on the overall performances of the devices. The control devices based on the PFI-modified PEDOT:PSS achieved a maximum current efficiency (CE) of 0.14 cd A-1, without any polymer additives in the emitting layer. In contrast, the CE of the devices with PVK and PABPC2.5 were dramatically elevated to 7.1 cdA-1 and 4.5 cd A-1 respectively, when a small molecular thermally activated delayed fluorescence was employed as the emitter. Enabled by a easily soluble phosphorescent emitter acetylacetonatobis(4-(4-tert-butylphenyl)-thieno[3,2-c]pyridinato-C2,N)iridium (PO-01-TB). The device with PABPC2.5 as the additive obtained a maximum CE of 42.0 cd A-1, which is significantly higher than 15.7 cd A-1 of the one with the additive PVK, attributed to the energy transfer in the emitting layer. The polymer additives not only overcome the issue of the hydrophobicity of the modified PEDOT:PSS but endow the exciton harvesting from the polymer to the small molecular emitters.

Polyfluorenes for Device Applications

Polarized Blue Polymer Light-Emitting Diodes Utilizing Rubbed Hole Injection Layers

Highly Efficient and Stable Blue Polymer Light Emitting Diodes Based on Polysilafluorenes with Pendent Hole Transporting Groups

Efficient Polyfluorene Derivatives for Blue Light-Emitting Diodes Enabled by Tuning Conjugation Length of Bulky Chromophores

Polyfluorene Polyelectrolytes and Their Precursors Processable from Environment-Friendly Solvents (alcohol or Water) for Pled Applications

Diketopyrrolopyrrole-Containing Polyfluorenes: Facile Method To Tune Emission Color And Improve Electron Affinity

Highly Efficient Blue Polyfluorenes Using Blending Materials As Hole Transport Layer

Fluorescent, Carrier‐Trapping Dopants for Highly Efficient Single‐Layer Polyfluorene LEDs

Semi-orthogonal Solution-Processed Polyfluorene Derivative for Multilayer Blue Polymer Light-Emitting Diodes

Synthesis, Photophysics, and Electroluminescence of Poly(Dibenzofluorene)S

Synthesis and Characterization of Hyperbranched Polyfluorenes Containing Triarylpyrazoline Cores Towards Efficient Blue Light‐emitting Diodes

Anionic Triphenylamine‐ and Fluorene‐based Conjugated Polyelectrolyte As a Hole‐transporting Material for Polymer Light‐emitting Diodes

Novel Fluorene-Based Light-Emitting Copolymers Containing Cyanophenyl Pendants and Carbazole-Triphenylamines: Synthesis, Characterization and Their PLED Application

High-efficiency red-light emission from polyfluorenes grafted with cyclometalated iridium complexes and charge transport moiety.

Efficient Ultraviolet-Blue Polymer Light-Emitting Diodes Based on a Fluorene-Based Non-Conjugated Polymer

Improving the Performance of Blue Polymer Light-Emitting Diodes Using a Hole Injection Layer with a High Work Function and Nanotexture.

Synthesis, Photophysics, and Electroluminescence of High-Efficiency Saturated Red Light-Emitting Polyfluorene-Based Polyelectrolytes and Their Neutral Precursors

Improving the Electroluminescent Performance of Blue Light-Emitting Polymers by Side Chain Modification.

High-Efficiency and Color Stable Blue-Light-Emitting Polymers and Devices

Thermally activated delayed fluorescent polymer- assisted morphological control on perfluorinated ionomer enriched surface and exciton harvesting for phosphorescent organic light-emitting devices

Efficient Blue Polymer Light Emitting Diode Based on Doping Polyfluorene with Surfactantlike Additives