Abstract:Nickel-rich layered lithium transition metal oxides, LiNixCoyMn1-x-yO2, are key cathode materials for high-energy lithium-ion batteries owing to their high specific capacity. However, the commercial deployment of nickel-rich oxides has been hampered by their poor thermostability and insufficient cycle life. Here full batteries with uncoated and TiO2-coated LiNi0.5Co0.2Mn0.3O2 cathodes and graphite anodes are compared in terms of electrochemical performance and safety behavior. The battery using a TiO2-coated LiNi0.5Co0.2Mn0.3O2 cathode exhibited better cyclic performance at high cutoff voltage. Electrochemical impedance spectroscopy analysis indicated that the TiO2-coated LiNi0.5Co0.2Mn0.3O2 cathode gave the battery a more stable charge transfer resistance. Transmission electron microscopy demonstrated that TiO2 coating reduced accumulation of the cathode electrolyte interface layer on the particle surface. Time-of-flight secondary ion mass spectrometry demonstrated that TiO2 coating markedly enhanced the interface stability of the cathode particle and protected the particle from serious etching by the electrolyte. Accelerating rate calorimetry revealed that the trigger temperature of thermal runaway for the battery using TiO2-coated LiNi0.5Co0.2Mn0.3O2 as cathode material was 257°C, which was higher than that of the battery with the uncoated LiNi0.5Co0.2Mn0.3O2 cathode (251°C). In situ X-ray diffraction during heating demonstrated that this enhanced safety can be attributed to the suppressed phase evolution of the coated cathode material.

Overcharge safety of Li-ion battery with lithium cobalt oxide cathode

Cathodes with Intrinsic Redox Overcharge Protection: A New Strategy Towards Safer Li-ion Batteries

Investigation and Suppression of Oxygen Release by LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode under Overcharge Conditions

Overcharge-Induced Phase Heterogeneity and Resultant Twin-Like Layer Deformation in Lithium Cobalt Oxide Cathode for Lithium-Ion Batteries

Toward a high-voltage fast-charging pouch cell with TiO2 cathode coating and enhanced battery safety

Investigation on the Overlithiation Mechanism of LiCoO 2 Cathode for Lithium Ion Batteries

Comparison of the Overcharge Behaviors of Lithium-ion Batteries under Different Test Conditions

Overcharge Behavior and Early Warning Analysis of LiNi0.5Co0.2Mn0.3O2/C Lithium-Ion Battery with High Capacity

Overcharge Investigations of LiCoO2/Graphite Lithium Ion Batteries with Different Electrolytes

Progress of overcharge performance improvement for Li-ion batteries

Evolution of the morphology, structural and thermal stability of LiCoO2 during overcharge

Compatible interface design of CoO-based Li-O2 battery cathodes with long-cycling stability

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Preventing the Distortion of CoO6 Octahedra of LiCoO2 at High-Voltage Operation of Lithium-Ion Battery: An Organic Surface Reinforcement

Insight into Thermal Analysis Kinetics of Surface Protected LiNi0.8Co0.15Al0.05O2 Cathode for Safe Lithium-Ion Batteries

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

Synergistic structure of LiFeO2 and Fe2O3 layers with electrostatic shielding effect to suppress surface lattice oxygen release of Ni-rich cathode

Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion