Abstract:A lattice‐matched MTO coating has successfully been built on ultrahigh single‐crystal LiNi0.9Co0.05Mn0.05O2 particle by a neoteric in situ chemical reaction process, which can not only relieve lattice strain by avoiding inhomogeneity of the Li‐ion concentration, but also suppress cation mixing and irreversible oxygen loss for ensuring the smooth transportation of Li‐ion, thus preventing planar gliding and delamination cracking along the sliding planes. Planar gliding along with anisotropic lattice strain of single‐crystalline nickel‐rich cathodes (SCNRC) at highly delithiated states will induce severe delamination cracking that seriously deteriorates LIBs' cyclability. To address these issues, a novel lattice‐matched MgTiO3 (MTO) layer, which exhibits same lattice structure as Ni‐rich cathodes, is rationally constructed on single‐crystalline LiNi0.9Co0.05Mn0.05O2 (SC90) for ultrastable mechanical integrity. Intensive in/ex situ characterizations combined with theoretical calculations and finite element analysis suggest that the uniform MTO coating layer prevents direct contact between SC90 and organic electrolytes and enables rapid Li‐ion diffusion with depressed Li‐deficiency, thereby stabilizing the interfacial structure and accommodating the mechanical stress of SC90. More importantly, a superstructure is simultaneously formed in SC90, which can effectively alleviate the anisotropic lattice changes and decrease cation mobility during successive high‐voltage de/intercalation processes. Therefore, the as‐acquired MTO‐modified SC90 cathode displays desirable capacity retention and high‐voltage stability. When paired with commercial graphite anodes, the pouch‐type cells with the MTO‐modified SC90 can deliver a high capacity of 175.2 mAh g−1 with 89.8% capacity retention after 500 cycles. This lattice‐matching coating strategy demonstrate a highly effective pathway to maintain the structural and interfacial stability in electrode materials, which can be a pioneering breakthrough in commercialization of Ni‐rich cathodes.

Toward a high-voltage fast-charging pouch cell with TiO2 cathode coating and enhanced battery safety

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

Toward a High-Voltage Practical Lithium Ion Batteries with Ultraconformal Interphases and Enhanced Battery Safety

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

Realizing the Single-Crystalline LiNi 0.90 Mn 0.05 Co 0.05 O 2 Cathode with Long-Life and High-Safety Property Driven by Polysiloxane Covering and PO43- Doping

Controlling Ni 2+ from the Surface to the Bulk by a New Cathode Electrolyte Interphase Formation on a Ni-Rich Layered Cathode in High-Safe and High-Energy-Density Lithium-Ion Batteries

Synthesis and Electrochemical Performance of Nano TiO2(B)-coated Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Materials for Lithium-Ion Batteries

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries

Modulating NCM622 electrode to efficiently boost the lithium storage and thermal safety of its full batteries

Having Your Cake and Eating It Too: Electrode Processing Approach Improves Safety and Electrochemical Performance of Lithium-Ion Batteries

Stabilizing effects of atomic Ti doping on high-voltage high-nickel layered oxide cathode for lithium-ion rechargeable batteries

Ultra-Thin AlPO4 Layer Coated LiNi0.7Co0.15Mn0.15O2 Cathodes With Enhanced High-Voltage and High-Temperature Performance for Lithium-Ion Half/Full Batteries

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

LiNi0.8Co0.15Al0.05O2 Cathodes Exhibiting Improved Capacity Retention and Thermal Stability Due to a Lithium Iron Phosphate Coating

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Lithium Phosphonate Functionalized Polymer Coating for High‐Energy Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 with Superior Performance at Ambient and Elevated Temperatures

Optimizing Both Bulk and Surface Structure of Li‐Rich Layered Cathodes for Long‐Life and Safe Li‐Ion Batteries

Ta induced fine tuning of microstructure and interface enabling Ni-rich cathode with unexpected cyclability in pouch-type full cell