Abstract:In order to accurately improve and predict chatter stability region of machining process, an optimization method of machining process with non-uniform allowance of integral impeller was proposed. The modal parameters of the workpiece process system were obtained using the finite element analysis. Based on the regenerative chatter analysis theory, a limit comparison diagram of the stability with uniform allowance and non-uniform allowance was established. The simulation results showed that the non-uniform allowance natural frequency is about 1.43 times as much as the uniform allowance natural frequency, and the machining system stiffness non-uniform allowance is twice as much as the uniform allowance, while the limit of chatter stability region is increased by 3 times. This article studied uniform allowance and non-uniform allowance of milling chatter stability with experimental method. Tool path for five-axis machining and machine tool simulation based on NX CAM were planned. The comparisons of cutting processing uniform allowance and non-uniform allowance were done, and the surface profile detection of the test part with the three-dimensional scanning was carried out. The experimental results showed that the average optimization rate for manufacturing precision of blade suction surface after optimization and pressure surface was 63.8% and 48.84%. The total experiment showed that this process optimization strategy could effectively improve the stiffness of the integral impeller blade and reduce the cutting chatter of the blade during the cutting process.

The Technique of 5 - axis NC Machining the Integrated Impeller with Feature - oriented

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

An efficient five-axis machining method of centrifugal impeller based on regional milling

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Judging of Machining Feasibility and Calculation of Midsection for the Five-Axis Milling of Shrouded Centrifugal Impeller

Planning and virtual simulation machining of multi-axis rough machining strategy for micro-integral impeller

Modeling and machining of integral impeller based on NURBS curve

Research on 5-axis CNC Simulation for Whole Impeller based on UG

Modeling and Precision Machining Simulation of Impeller of Road Machinery

Experimental Research on Five-axis Coordinated Micromilling of Micro Integral Impeller

Key Technologies Research For Impellers Machining Based On Nx

A new rough machining approach for a ruled surface impeller

Integrated NC Programing and Machining Process Simulation of Impeller Parts

Simulation and Optimization of Five-axis NC Machining of Integral Impeller Based on Improved Particle Swarm Optimization

Efficient Tool Path Generation for Five-Axis Machining of a Difficult Machined Centrifugal Impeller

Algorithm for 5-axis Numerical Control Flank Milling of Arbitrary Surfaces

Structural configuration optimization of five-axis machining center based on the post processing information of impellers

Tool-path planning for 5-axis NC rough machining of closed impeller channel

Key Technologies in Ruling Surface Impeller Plunge Milling

Several-Stage Tool-Path Scheduling in 5-Axis Roughing of Impeller

Tool-path Planning for Rough Machining of Impeller in 5-Axis Machine Tools