Abstract:One-staged forming of porous C/C composites as well as volume fraction control of pores were realized, based on thermophysical property analysis and proportioning design of raw materials. Short fiber reinforced C/C-SiC composites with high densification and low content of residual Si were prepared by hot-pressing-infiltration two-step method at low temperature. The structural evolution of C/C-SiC composites was analyzed in detail, the mechanical properties as well as failure behaviors were also investigated. Results show that the porous C/C composites present bipolar distribution in pore size, adding aramid fibers is an effective method to improve the connectivity of network pores, exhibiting a significant regulatory effect. Both SiC network skeleton and pinning structure with strong interface between SiC matrix and carbon fiber bundle can entrust the excellent mechanical properties of C/C-SiC composites with high carbon fiber content. In addition, the fracture toughness of C/C-SiC composites can be improved significantly with the addition of aramid fibers, resulting in the increase of crack propagation path. The isotropic distribution of carbon fiber in plane and the uniform distribution of ceramic phase between layers play a positive role in improving the bearing capacity and friction stability of C/C-SiC composites.

Short Carbon Fibers Reinforced SiC Composite and Dependence of C_f Fraction and Pressure on Its Properties

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Effects of In-Situ Carbon Layer and Volume Fraction of SiC Fiber on the Mechanical Properties and Fracture Behaviors of SiCf/SiC Composites Fabricated by a Modified PIP Method

EFFECT OF C/C POROUS PREFORM ON THE MICROSTRUCTURE AND FLEXURAL STRENGTH OF C/C-SiC COMPOSITES

Mechanical properties of C/C-SiC composites by compression molding

Behavior of Short Carbon Fibers in Cfiber/Si3N4 Composites by Hot Pressed Sintering

Preparation and Properties of Continuous Carbon Fiber-Reinforced Silicon Carbide Composites

Microstructure and Mechanical Behavior of the C-f/Ti3SiC2-SiC Composites Fabricated by Compression Molding and Pressureless Sintering

Microstructure and mechanical property of short fiber reinforced C/C-SiC composites

Processing and Characterization of C-F/Sic Composites

Influence of Fiber Content on C/C-SiC Brake Materials Fabricated by Compression Molding and Hot Sintering

MECHANICAL PROPERTY OF 2.5 DIMENSIONAL SILICON CARBIDE FIBER REINFORCED SILICON CARBIDE COMPOSITES

Microstructure and Mechanical Properties of SiC and Carbon Hybrid Fiber Reinforced SiC Matrix Composite

Effect of C/SiC Volume Ratios on Mechanical and Oxidation Behaviors of Cf/C–SiC Composites Fabricated by Chemical Vapor Infiltration Technique

Influence of the Porosity of C/C on the Characterization of C/C-Sic Composites Prepared by Reactive Melt Infiltration Method

Preparation and Properties of Short-Fiber-reinforced C/SiC Composites

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Effect of Fabrication Process of Carbon Interlayer on Mechanical Properties of SiC_f/SiC Composites

Fabrication and Characterization of a Carbon Fibre Reinforced Carbon–silicon Carbide–titanium Silicon Carbide Hybrid Matrix Composite

Effect of Carbon Particle and Carbon Fiber on the Microstructure and Mechanical Properties of Short Fiber Reinforced Reaction Bonded Silicon Carbide Composite