Abstract:In order to prolong the service life of multistage axial compressors, it is increasingly important to study the influence of blade surface roughness on the compressor performance. In this paper, a five-stage axial compressor of a real aero-engine was selected as the research object, and an equivalent gravel roughness model was used to model the roughness based on measured blade surface roughness data. Furthermore, the impact of blade surface roughness on the performance at design rotational speed was studied by full three-dimensional numerical simulation, and the mechanism of performance variation caused by the roughness was discussed combined with quantitative and flow field analyses. The results show that, when the blade surface roughness of all blades increases, the peak total efficiency decreases by approximately 0.4%, the blocking mass-flow decreases by approximately 0.3%, and the stable working range changes little. When the surface roughness of all rotor blades increases, the performance decline is close to that of all rotor and stator blades, and the variation in stator blade roughness has little effect on the compressor performance. Regarding the variation in roughness, the performance of the latter stage is more sensitive than that of the previous stage, and the decline in the performance of the fifth stage contributes the most to the total performance degradation of the compressor. Once the surface roughness of the fifth-stage rotor blade increases, the flow in the middle of the rotor blade deteriorates and the stage performance decreases obviously, which is the main reason for the decline in the overall performance.

Performance Calculation of Axial Flow Compressor with Generalized Stage Characteristics

A throughflow-based optimization method for multi-stage axial compressor

Calculation of the Overall Aerodynamic Performance of Multi-Stage Axial-Flow Compressor

Research on the Flow Path Design Method of Axial Flow Compressor of Gas Turbine

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

An Average Stage Characteristics Generation Method of Multistage Axial Flow Compressors

Analytic Method for Computing Axial-flow Compressor and Turbine Characteristics

Characteristic Estimation Method of Variable Geometry Multistage Axial-flow Compressors

Axial Compressor Performance Calculation at Off-Design Conditions

Extrapolation of Performance Curves of Compressors Based on Averaged Infinitesimal Stage Characteristics

An 11-Stage Axial Compressor Performance Simulation Considering the Change of Tip Clearance in Different Operating Conditions

Numerical Prediction of Multi-Stage Axial Compressor Performances

Calculation model of performance parameters for rolling piston compressors

Efficient Performance Prediction of a One-and-half Stage Axial Compressor Based on a Streamline-Curvature Throughflow Method and Stage Characteristics

Performance Analysis of Multistage Axial Compressor at Surge Conditions

Development and application of a throughflow method for high-loaded axial flow compressors

Development of A Throughflow Method for Aerodynamic Analysis of Highly Loaded Axial Flow Compressors

Performance Prediction of Transonic Axial Compressors Using Improved Streamline Curvature Approach

Numerical Method of Transonic Axial Compressor Performance Prediction

THE OFF-DESIGN PERFORMANCE PREDICTION OF AXIAL COMPRESSOR BASED ON A 2D APPROACH

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage