Abstract:Large airborne optical systems require very high beam pointing control accuracy , which will put forward some new challenges for the design of an airborne isolation platform .We analyze the characteristics of aircraft struc-tural vibration , and propose to develop a pneumatic and electromagnetic hybrid driving isolator .The isolator uses an adjustable pneumatic air spring with an external air container to suspend the payload , and a coaxial electromagnetic actuator is integrated with the output rod of the isolator , which provides a broadband active control force for the pay-load.The preliminarily determined carrying capacity is 150~190 kg and the isolation frequency range is from 1 Hz to 100 Hz.This paper firstly describes the principles of pneumatic /electromagnetic hybrid driving and presents a structural layout of the isolator .Then it simplifies the system , establishes the physical model , and derives the dy-namic equations of the isolator .Finally, the Matlab/Simulink numerical simulations of the isolator are conducted to research respectively the feasibility and efficiency of PID control algorithm and LQR control algorithms .The simula-tion results and their analysis show preliminarily that:(1) the two active control algorithms are efficient , and the payload′s vibration displacement amplitude can be reduced to ±10μm level under a wide frequency band ( 1~100 Hz) random vertical disturbance;(2) this vibration reduced performance of the isolator can meet the installation requirements of large airborne optical equipment .The comparison between the PID and LQR control methods shows that the vibration reduced performance of the PID method is slightly better than that of the LQR method for a single isolator system;besides, the PID method is easy to implement .

Design of Vibration Isolation System for Cab Suspension of Commercial Vehicle

Design and Development of Vibration Isolation System of Commercial Vehicle's Cab Suspension

Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension

Vibration Isolation Analysis and Optimization of Commercial Vehicle Cab Suspension System

Simulate Design and Experimental Analysis of Commercial Vehicle Cab Suspension

The Application of Sensitivity Method in Vehicle Dynamics Analysis

Matching and optimization of heavy commercial vehicle cab air suspension system

Optimal Design of Commercial Vehicle Cab Suspension System at Full Speeds

Analysis of Vibration Characteristics Basing on a Multi-Rigid Suspension Model and a Multi-Flexible Suspension Model

Study and Simulation of Vehicle Suspension System

Analysis of Vibration Isolation Performances of Vehicle Suspension System Based on Vibrational Power Flow Method

Experimental Study on Effects of Cab Suspension System on Heavy Vehicle Ride Comfort

Design and Simulation of an Active Vibration Isolator Based on Pneumatic-Electromagnetic Hybrid Driving

The Optimization for Vibration Comfort of Commercial Vehicle Cab Based on Road Test

The Modeling Analysis and Improved Design for Full-Floating Cab Mounting of Heavy Duty Trucks

Study on Vibration Reduction Design of Suspended Equipment of High Speed Railway Vehicles

Pitching Vibration Suppression of Cab System Based on the Suspension Longitudinal Coupling Effects

Study on Testing Method and Testing System of Vehicle Suspensions Performance

Study on the Effect of Semi-Active Control Method Matching for Truck Cab and Seat Suspension on Driver Comfort

Analysis and Optimization of Vehicle Ride Comfort and Suspension System

Design and experiment of double-layer vibration isolation system for mobile vehicle-mounted optical platform