Abstract:The bead geometry, microstructure and mechanical properties of wire laser additively manufactured (WLAM) Ti-6Al-4V samples reinforced by different contents of micron-sized lanthanum oxide (La2O3) particles were explored. The images attained through high-speed charge coupled device (HCCD) and metallographs showed that the addition of La2O3 changed the morphologies of the weld bead of Ti-6Al-4V alloy to lead to the significant reduction of the width of the deposited weld bead and remarkable growth of the weld penetration. The observation result attained through the scanning electron microscope (SEM) revealed that relative to the condition without the addition of micron-sized La2O3 particles, nano-sized La2O3 particles were uniformly distributed in the matrix after adding micron-sized La2O3 particles; beta grains and alpha phases were both greatly refined. Compared with the primitive La2O3 powders, the morphology of La2O3 in the matrix approximately presented a spherical shape. It indicated that La2O3 particles in the molten pool partly or completely decomposed during WLAM. The dispersedly distributed nano-sized La2O3 particles induced fine grain strengthening and dispersion strengthening. Therefore, the tensile strength and Vickers hardness of the deposit of the Ti-6Al-4V alloy rose with increasing addition amount of La2O3. However, the decomposition of La2O3 particles resulted in the formation of interstitial atoms (such as interstitial O atoms), thus leading to the decrease of the elongation of deposits. Without the addition of La2O3 particles, the deposit of the Ti-6Al-4V alloy fractured in the large-size lamellar alpha during the tensile test, in which the fracture showed micro-morphology of ductile fracture. After the addition of La2O3 particles, the deposit of Ti-6Al-4V alloy fractured at the grain boundary alpha phase during the tensile test and both cleavage and ductile morphologies were found at the fracture.

Microstructure and strengthening mechanisms of molybdenum alloy wires doped with lanthanum oxide particles

Microstructure and Tensile Properties of Oxide Dispersion Strengthened Molybdenum Alloys Prepared by Different Doping Process

Effects of doping methods on microstructure and mechanical properties of Mo-La2O3

The strengthening mechanism of rare earth lanthanum oxide doped molybdenum alloys

Microstructure and Strengthening Mechanism of Oxide Lanthanum Dispersion Strengthened Molybdenum Alloy

Microstructure and Mechanical Properties of Unalloyed Molybdenum Fabricated Via Wire Arc Additive Manufacturing

Microstructure and Mechanical Properties of Molybdenum Alloy Strengthened by Lanthanum Oxide and Silicon

Effect of Si and La additions on the microstructure and mechanical properties of molybdenum wire

Microstructure and Mechanical Properties of Lanthanum Oxide-Doped Mo–12Si–8.5B(at%) Alloys

Influences of Doping Methods on Microstructure and Fracture Toughness of Mo-La Alloys

INTERACTIONS BETWEEN La2O3 PARTICLES AND DISLOCATIONS IN Mo-La2O3 ALLOYS

Strengthening and Elongation Mechanism of Lanthanum-doped Titanium-Zirconium-Molybdenum Alloy

Analysis on Time Sequence Characteristics of Occurrence Status of Lanthanum in Mo Alloy Wires

Effect of addition of micron-sized lanthanum oxide particles on morphologies, microstructures and properties of the wire laser additively manufactured Ti-6Al-4V alloy

INFLUENCE OF DOPING WAYS ON FRACTURE TOUGHNESS OF Mo-La2 O3 ALLOYS AND DOPED PARTICLES’ MICROSTRUCTURE

Ductility of Mo–12Si–8.5B alloys doped with lanthanum oxide by the liquid–liquid doping method

Effects of Doping Nano-La2O3 on the Microstructure and Mechanical Properties of Mo-9Si-18B Alloys

Microstructure and Mechanical Properties of Multi-Components Rare Earth Oxide-Doped Molybdenum Alloys

Effects of doping route on microstructure and mechanical properties of W−1.0wt.%La2O3 alloys

Ductilizing Mo alloys via nanoparticle-stabilized microstructural hierarchy

Boosted mechanical properties of sintered MoLa alloys with ultrafine-grains by the nanostructuring of secondary phase