Abstract:Background: Plastic scintillators have been used as radiation detectors for the past few years, as they are water-equivalent and independent of the dose, dose rate, and angle of incidence. In addition, they are also independent of the presence of a magnetic field and could be used for in vivo dosimetry in an MR-Linac. With the advent of a new commercial scintillation detector, Blue Physics Model 10, its characterization has been performed on an MR-Linac with a view to future applications. Purpose: To perform the dosimetric characterization and study potential applications of a novel commercial plastic scintillation detector in a MR-Linac. Methods: Scintillation detector description, calibration procedure, short-term repeatability, dose-response linearity, dose-rate dependence, angular dependence, and temperature dependence have been studied. Percent-depth-dose (PDD) and beam profiles were measured for small fields and a standard field, as well as output factors, for comparison with other PTW detectors: a diamond diode and PinPoint and Semiflex 3D ionization chambers. The suitability of the plastic scintillator for in vivo dosimetry in a magnetic field has also been studied measuring the dose to a point in an anthropomorphic phantom while acquiring MR imaging. This measured dose was compared with that calculated with Monaco planning system and with that measured with a PTW Semiflex 3D chamber, the latter without acquiring MR images. Results: Short-term repeatability presented negligible variations (<0.4%) for 100 and 20 MU. Similar results were obtained for dose-response linearity and dose-rate dependence. A small angular dependence was determined, while the scintillator resulted practically independent of the temperature. PDDs showed excellent agreement except in the build-up region, and calculated penumbras with the profiles given by the scintillator were between the ones obtained with the diamond detector and the PinPoint ionization chamber. Measured OF with the scintillator were the highest between all detectors, 1.26% higher than the value obtained with the microdiamond for the smallest field measured, 0.5 × 0.5 cm2 . Finally, the total dose to a point measured with the scintillator was 0.51% higher compared to that calculated by the planning system. Conclusion: The Blue Physics model 10 scintillation system showed excellent dosimetric characteristics. Its response independent of the temperature and the presence of a magnetic field make it suitable for in vivo dosimetry in an MR-Linac while acquiring MR images, which could solve the impossibility of performing a dosimetric QA for each adapted plan. Furthermore, its temporal resolution allows independent radiation pulses to be measured and visualized, which could be used in future applications.

Experimental Studies of the Characteristics of A Real-Time Ion Detector-Plastic Scintillator

Development of A Real-Time Ion Spectrometer with A Scintillator for Laser-Driven Ion Acceleration Experiments

Experimental study of plastic scintillators array for compact fast neutron-gamma dual-modality imaging system

Study in the Optical Performance of Plastic Scintillator with WLS Fiber

INVESTIGATION OF LSO SCINTILLATORS FOR HIGH-RESOLUTION PET DETECTORS

A Flexible, On-Line Magnetic Spectrometer for Ultra-Intense Laser Produced Fast Electron Measurement

Calibration and Test of CsI Scintillator Ion Detection System for Tokamak Magnetic Field Diagnosis Based on Laser-Driven Ion-Beam Trace Probe (LITP)

Dosimetric characterization of a novel commercial plastic scintillation detector with an MR-Linac

Performance simulation study of plastic scintillator arrays for stability monitoring applications

Experimental Research of Fast Proton Generation from Ultra-short Intense Laser Pulses Interaction with Different Thickness Al Foils

Characterization of light yield non-proportionality in plastic scintillator-based detectors for satellite cosmic-ray experiments

Measure Pet Detector Performance with the Intrinsic Radioactivity of Scintillator

Proton Bragg curve and energy reconstruction using an online scintillator stack detector

Studies of Prototype CsI(Tl) Crystal Scintillators for Low-Energy Neutrino Experiments

Real-time single-proton counting with transmissive perovskite nanocrystal scintillators

A Real-Time Energy Response Correction Method for Cs3Cu2I5:Tl Scintillating Dosimeter

Development of Radiation Hard Scintillators

Full‐Inorganic Micro‐Fiber Probe for Real‐Time Radiation Monitoring

SPORT: A new sub-nanosecond time-resolved instrument to study swift heavy ion-beam induced luminescence - Application to luminescence degradation of a fast plastic scintillator

Exploring Scintillators and Cherenkov Radiators for MIP Timing Detectors

Design Optimization of Plastic Scintillators with Wavelength-Shifting Fibers and Silicon Photomultiplier Readouts in the Top Veto Tracker of the JUNO-TAO Experiment