Abstract:Flow injection (FI) techniques were used to develop an efficient on-line sorbent extraction pre-concentration system for graphite furnace atomic absorption spectrometry with lead as a model trace element. Bonded silica with octadecyl functional groups (C18) was used as sorbent in a 15-µl conically shaped micro-column. The lead diethyldithiocarbamate chelate was formed on-line, loaded on to the column for 60 s, washed with de-ionised water and eluted with ethanol into a collector with a volume of 75 µl, made from 0.35 mm i.d. polytetrafluoroethylene tubing. The collected eluate was introduced into the graphite tube by an air flow on initiation of the FI system for pre-concentration of the next sample. The reproducibility of FI peak gradients was exploited through precise timing of the collection of the eluate fraction so that end sections of the eluate bolus containing lower analyte concentrations were discarded. A 26-fold enhancement in peak area compared with 50 µl direct introduction was obtained with 60-s pre-concentration while achieving a precision of 1.9% relative standard deviation for 0.1 µg l–1 of Pb (n= 11), and a detection limit of 0.003 µg l–1(3σ). The complete cycle of operation was 150 s which conveniently fitted into the time interval between successive graphite furnace firings. Determination of Pb in sea water samples showed that the interfering matrix had been almost completely removed during the pre-concentration, and determinations were made without using chemical modifiers. Results obtained for National Research Council of Canada Standard Reference Materials CASS 1, CASS 2 [Seawater (Coastal)] and NASS 1 [Seawater (Open Ocean)] using matrix-matched standards and for the SLRS 1 Riverine Water using simple aqueous standards agreed well with certified values.

Conversion Techniques in Flow Injection Analysis

Sulfide Measurement by Flow Injection Analysis with Flame Photometric Detection

Flow Injection On-Line Separation and Preconcentration for Electrothermal Atomic Absorption Spectrometry. Part 1. Determination of Ultratrace Amounts of Cadmium, Copper, Lead and Nickel in Water Samples

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry

Flow injection on-line preconcentration-graphite furnace atomic absorption spectrometry for the determination of cadmium, copper and nickel

THE DETERMINATION OF TRACE AMOUNTS OF HEAVY-METALS IN WATERS BY A FLOW-INJECTION SYSTEM INCLUDING ION-EXCHANGE PRECONCENTRATION AND FLAME ATOMIC-ABSORPTION SPECTROMETRIC DETECTION

High Efficiency Low Sample Consumption On-Line Ion-Exchange Pre-Concentration System for Flow Injection Flame Atomic Absorption Spectrometry

Analysis of Samples with High Dissolved Solids Content Using Flow-Injection Flame Atomic-Absorption Spectrometry

Combination of Flow-Injection Techniques with Atomic Spectrometry in Agricultural and Environmental Analysis

On-line Separation and Preconcentration in Flow Injection Analysis

Direct Processing and Analysis of Solid and Other Complex Samples with Automatic Flow Injection Systems

Flow injection on-line dilution for flame atomic absorption spectrometry by micro-sample introduction and dispersion using syringe pumps

Flow Injection Semi-online Sorbent Extraction Preconcentration for Graphite Furnace Atomic Absorption Spectrometry

Flow Injection Atomic Absorption Spectrometry

A flow injection knotted reactor suction elution method coupled with flame atomic absorption spectrometry for the determination of trace lead and zinc in water

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

FLow-injection analysis: a new approach to quantitative measurements in clinical chemistry.

An Efficient Flow-Injection Online Dilution System for Flame Atomic-Absorption Spectrometry Based on Micro-Zone Penetration

Determination of Trace Amounts of Chromium (vi) by Flow Injection Analysis with Chemiluminescence Detection

Flow injection on-line preconcentration and flame atomic absorption spectrometric determination of iron, cobalt, nickel, manganese and zinc in sea-water

Flow-Injection Online Sorbent Extraction Preconcentration for Graphite-Furnace Atomic-Absorption Spectrometry