Abstract:Harmonics in the power grid contribute to increased power losses in both the core and windings of power transformers. These losses lead to abnormal rises in temperature causing overheating and reduce the efficiency of the transformer. If the losses and temperature exceed the values set during the design stage for linear load conditions, it can damage the transformer's insulating materials and shorten its lifespan. To assess the thermal impact of power system harmonics on transformers under steady-state and transient conditions, the rated losses and harmonic losses of the transformer are calculated. These losses are then inputted into a developed thermal 3D finite element method (FEM) performance model to determine the temperature distribution of transformer components. The numerical results from the thermal model will be compared with data from a Hyundai test report and real measurements from Egypt's Kureimat power plant, specifically a 750 MW combined cycle power plant. The thermal modeling is focused on a step-up (16.5/240 kV), 240 ± 4 × 2.5%, 180/240/300 MVA power transformer operating in ONAN, ONAF1, and ONAF2 modes. This paper shows that the developed model aligns closely with actual measurements and the HYUNDAI test report. The loss calculations reveal that the discrepancy in total losses, with and without accounting for harmonics, becomes more pronounced as the load increases. Using this model, the presence of grid harmonics results in a higher temperature distribution across transformer components, leading to an increase in the hot spot temperature.

Research and Evaluation of the Transformer Harmonic Model

Simplified Modeling of Power Electronic Interfaced Load Considering Harmonics

Research on Short-Circuit Vibration of Power Transformer

Evaluation of the Calculation Method for Stray Losses in Structural Parts of HVDC Converter Transformers

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Transformer harmonic loss calculation and influence factor analysis

Harmonic model of power transformer

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Modeling and Evaluation of Winding Losses in High Voltage Planar Transformers

An Improved Winding Loss Analytical Model of Flyback Transformer

A MODIFIED THREE-PHASE MODEL OF TRANSFORMERS WITH DELTA-CONNECTED WINDINGS

A RESEARCH ON HARMONIC MODEL OF THREE PHASE MULTI-LEGGED TRANSFORMER

Power Transformer Transient Modeling Considering the Effects of On-Load Tap Changer

Research on Application of Transformer Vibration Model in Turn-to-turn Short

Evaluating the Harmonic Effects on the Thermal Performance of a Power Transformer

High frequency power transformer modelling for frequency response analysis studies

Optimization of HTS Transformer Parameters and Analysis of AC Losses Under Harmonic Conditions

A New Research for Internal Fault Simulation Model of Transformer

Semi-analytical and Data-Driven Models of Electric Field Strength Considering the Actual Structure of Medium Frequency Transformers

Research on condition assessment method of intelligent power transformer

Measurement and Simulation Analysis of Electrified Railway Harmonic