Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Experimental study on a small-scale liquefied natural gas apparatus

Small-scale Air Separation Process Utilizing Cold Energy from LNG Satellite Station

Performance Analyses on Four Configurations of Natural Gas Liquefaction Process Operating with Mixed Refrigerants and a Rectifying Column

A Potential Auto-Cascade Absorption Refrigeration System for Pre-Cooling of LNG Liquefaction

Novel air separation unit cooled by liquefied natural gas cold energy and its performance analysis

Experimental Study on an Absorption Refrigeration System at Low Temperatures

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

A Study On A New Auto-Cascade Refrigerating Cycle

Development of Natural Gas Liquefaction Processes Using Mixed Refrigerants: a Review of Featured Process Configurations and Performance

A Critical Analysis of Natural Gas Liquefaction Technology

A sustainable syngas cryogenic separation process combined with ammonia absorption refrigeration pre-cooling cycle

Low-grade heat utilization and CO2liquefaction process based on LiBr absorption refrigeration

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Experimental Research on -60℃ Refrigerator

Experimental Studies on an Variable Compositions Auto-Cascade Refrigerator Operating With a Rectifying Column

Theoretical Helium Liquefaction Rate Based on the Temperature-Distributed Refrigeration Method in Regenerative Refrigerators

Experimental investigation on RORC system performance for recovering LNG cold energy under heating and cooling capacities variations

Experimental Research on the Performance of a Gas Lift Bubble Pump Based on a Diffusion Generation Process

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Design and Optimization of Large-Scale Natural Gas Liquefaction Process Based on Triple Refrigeration Cycles

Design of a Device and System to Study the Liquid–Solid-Phase Equilibrium Experiment of CO2 in PLNG