Abstract:An alternative way was put forward to separate Ir(IV) and Rh(III) ions from a mixed chloride solution by extraction of rhodium with tri-butyl phosphate (TBP). Stannous chloride was added to the original solution containing RhCl63− and IrCl62− ions before extraction; IrCl62− was reduced to IrCl63−, which cannot be extracted by TBP, and RhCl63− was reduced to Rh(I), which was further complexed with SnCl3−, forming a bi-nuclei bridged complex anions of the form [Rh2Cl6−n(SnCl3)n]4− (n=2–4) and were extracted by TBP simultaneously. A mixed solution of HCl and NaClO3 in which the strong oxidant chlorine was produced, was used for stripping the rhodium. During the stripping process, both Rh(I) and SnCl3− in the complex anions were oxidized to Rh(III) and Sn(IV) destroying the structure of the [Rh2Cl6−n(SnCl3)n]4− (n=2–4) anions; Rh(III) was stripped into the aqueous solution while IrCl62− remained in the organic phase experiencing no change in the strong oxidative environment. Because of their high percent extraction by TBP, the SnCl3− and SnCl62− anions are always kept in the organic phase whether in the process of extraction or stripping the rhodium. The rhodium was selectively stripped with iridium and tin. Finally, all of the tin was stripped by sodium hydroxide and reclaimed, meanwhile, the TBP was regenerated. The effect of Sn/Rh and Sn/Ir molar ratios on the percent extraction was studied. The results show that separation of the two ions can be realized only when the two molar ratios are both at least equal to 4. Two groups of separation tests were conducted: one with the solution containing identical quantities of Rh(III) and Ir(IV), the other with the solution containing very low Rh(III)/Ir(IV) ionic concentration ratio. Both of the separation results proved to be very effective.

Solvent extraction of rhodium from aqueous solution of Rh(III)–Sn(II)–Cl− system by TBP

An alternative way to separating Ir(IV) and Rh(III) ions from a mixed chloride solution with added stannous chloride

Solvent Extraction of Rhodium and Ruthenium from Chloride Solutions added Tin(II) with Primary and Secondary Amines

Solvent Extraction Characteristics of Ruthenium from Chloride Solutions added Tin(II) with TOA and TOMAC

Study on extraction of Rh(III) by DABCO-based ionic liquid from hydrochloric acid medium

Experimental study on extraction of scandium from hydrochloride acid leaching liquid in TBP

Separation of rhenium(VII), molybdenum(VI), and vanadium(V) from hydrochloric acid solution by solvent extraction with TBP

Continuous extractive separation of palladium ( II ) ,platinum ( IV ) and rhodium ( III ) with phenylthiourea -tributylphosphate system

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine

Solvent Extraction of Trace Gold(i) in Alkaline Cyanide Solution Using CTAB/TBP System

Solvent extraction of Terbium(III) from chloride solution using organophosphorus extractant, its mixture and ionic liquid in the presence of organic acids

Simple Amides and Amines for the Synergistic Recovery of Rhodium from Hydrochloric Acid by Solvent Extraction

Solvent extraction and stripping of gold(I) cyanide in the tetradecyldimethylbenzylammonium chloride system

The Recovery of Sulfuric Acid in the Presence of Zr(IV) and Hf(IV) by Solvent Extraction with TEHA and Its Mixtures

Extraction and stripping of Cr(VI) from aqueous solution by solvent extraction

New Approach for Trace Thallium Removal in High Purity Ammonium Rhenate Solution by P204 Extraction

Removal of impurities from bismuth pickling solution using solvent extraction with TBP

Efficient extraction of platinum(IV) using tertiary-amine groups functionalized thiacalix[4]arene as extractant

Separation of Pd from Pt and Rh by solvent extraction method from waste solution

The Extraction of Tc(VII), Fe(III), Ru(II), Pd(II) and Mo(VI) from Nitric Acid Solution by Bis(2,4,4-trimethylpentyl)dithiophosphinic Acid (HBTMPDTP)

Solvent Extraction of Au(I) from Auro-Cyanide Solution with Cetyltrimethylammonium Bromide/Tri-n-Butyl Phosphate System using Column-Shaped Extraction Equipment