Abstract:Designing and selecting extractants with high selectivity between uranium and thorium, and developing the relevant separation process is one of the key points to realize efficient utilization of nuclear resources in the thorium-uranium nuclear fuel cycle. In this work, we used four phenanthroline-derived phosphine-oxide extractants with different substituents and studied their extraction ability and separation effect on U(VI)/Th(IV) under different conditions. The Et-2-BPPhen and Ph-2-BPPhen extractants show weak and strong extraction abilities for U(VI) and Th(IV), respectively. The Et-Ph-BPPhen(R,R) and Et-Ph-BPPhen(R,S) extractants could co-extract U(VI) and Th(IV) under high acidity (D-U(VI) > 300, D-Th(IV) > 40, SFU(VI)/ Th(IV) < 7, 4 M HNO3), and show high selectivity towards U(VI) over Th(IV) at low acidity (SFU(VI)/ Th(IV) > 200, 0.1 M HNO3). Most Th(IV) can be stripped by adjusting the acidity of the aqueous phase, while U(VI) still remains in the organic phase (S-Th(IV) > 95 %, S-U(VI) < 5 %), so as to achieve the step-by-step process for co-extraction and selective separation. Then, the slope analysis and NMR titration (H-1 and P-31) determined BPPhen ligands could form ML-type complex with U(VI), and can simultaneously form M/L = 1:1 and 1:2 complexes with Th(IV). The stability constants of the metal-ligand complexes were fitted by UV-Vis spectroscopic titration to estimate coordination abilities of four ligands. Finally, the single-crystals of complexes with the structures of [UO2(L)(NO3)(2)], [Th(L)(NO3)(4)] and [Th(L)(H2O)(2)]4(ClO4), (L = Et-2-BPPhen/Et-Ph-BPPhen(R,R)/Et-Ph-BPPhen(R,S)/Ph-2-BPPhen) were produced, and their coordination and packing mode were analyzed. This work contributes to revealing the structure-activity relationship of phenanthroline phosphine-oxide extractants and providing a reference for designing new extractants with high U(VI)/Th(IV) separation efficiency.

Separation of rhenium(VII), molybdenum(VI), and vanadium(V) from hydrochloric acid solution by solvent extraction with TBP

Efficient Separation of Re (VII) and Mo (VI) by Extraction Using E-1006–Ammonium Sulfate Aqueous Two-Phase System

The Extraction of Tc(VII), Fe(III), Ru(II), Pd(II) and Mo(VI) from Nitric Acid Solution by Bis(2,4,4-trimethylpentyl)dithiophosphinic Acid (HBTMPDTP)

Separation of V (V) and Mo (VI) in roasting-water leaching solution of spent hydrodesulfurization catalyst by co-extraction using P507 - N235 extractant

A Review on the Separation of Niobium and Tantalum by Solvent Extraction

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine

Solvent extraction of Terbium(III) from chloride solution using organophosphorus extractant, its mixture and ionic liquid in the presence of organic acids

Extraction and separation of vanadium (IV) by EHEHPA with citric acid complexing iron (III) from sulfate leaching solution

Liquid-Liquid Extraction of Vanadium(V) and Niobium(V) with Tris(2-ethylhexyl)phosphate: Mutual Separation of Vanadium(V), Niobium(V), and Tantalum(V), and Analysis of Steel Samples

Separation of rare earth elements by synergistic solvent extraction with phosphonium-based ionic liquids using a β-diketone extractant and a neutral ligand

Solvent Extraction of Molybdenum (VI) from Hydrochloric Acid Leach Solutions Using P507. Part I: Extraction and Mechanism

Substituent Effects of Phenanthroline-Derived Phosphine-Oxide Extractants on Extraction and Separation Performance Towards U(VI)/Th(IV)

Extraction kinetics of separating molybdenum(VI) over iron(III) from high acid leach solutions with mixtures of P507 and N235

Solvent extraction of rhodium from aqueous solution of Rh(III)–Sn(II)–Cl− system by TBP

Study of the Chemical Recovery and Selectivity against U in the Radiochemical Separation of Th with Tri-n-butyl Phosphate by Varying the Proportion of Xylene and HCl Concentration

Separation of Vanadium and Tungsten in Roasting‐acid Leaching Solutions of the Spent Selective Catalytic Reducing Denitration Catalyst by Co‐extraction Using Hydroxyoxime Extractant‐quaternary Ammonium Salt Extractant LIX984–N263 Extractant

Weak Interaction Induced Selective Separation of V/Mo/Co from Spent Hydrodesulfurization Catalyst Leaching Solution: Mechanism and Strategy

Separation and recovery of uranium and beryllium from acidic sulphate solutions by solvent extraction using mixture of organophosphonic extractants

Continuous extractive separation of palladium ( II ) ,platinum ( IV ) and rhodium ( III ) with phenylthiourea -tributylphosphate system

Separation and Recovery of Vanadium(IV), Iron, and Titanium from Sulfate Solutions by the Synergistic System Composed of P204 and P507