Abstract:At present, the wind tunnel experiment is more and more widely used, but it is rarely used in the construction industry. Therefore, this thesis is to study the wind load of prefabricated buildings by numerical simulation. First, the application field of wind load numerical simulation is analyzed. Next, the numerical model is used to simulate the average wind pressure distribution on the building surface of single tower, tower G and tower F. The turbulence model is established based on fluid mechanics, which makes the obtained data more accurate and can converge quickly. Finally, the wind load interference effects of two fabricated towers and a single tower are analyzed. The experimental results show that the moment coefficient interference factor of tower F remains between 0.696~1.125 and that of tower G remains between 0.291~1.043. When the wind direction angle is 90°, the maximum values of the building base torque and the base bending moment around the X axis appear simultaneously, and the moment around the Y axis is not 0, which will change the stress of the building on the base. If the wind direction angle becomes 0°, the two fabricated towers will interact to reduce the impact on the base moment of the upstream building. Meanwhile, the wind pressure interference factor on the wall surface of prefabricated buildings remains between [-1, 1.5]. When the buildings in the upstream are blocked, the wind pressure interference factor may become 0. However, the shape coefficient of negative pressure on the inner wall of the building will increase rapidly due to the narrow channel effect. This thesis will analyze the wind load on the surface of prefabricated buildings through numerical simulation, which will help the wind engineering team build safer prefabricated buildings.

Wind load on industrial building during construction and its wind-induced collapse mechanism

Wind-resistant safety analysis of light-weight steel portal frame structures

The Numerical Simulation for the Wind Fields and Wind Loads Around Spatial Structures

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

Numerical Study of the Effect of Wall Opening on Wind Pressures on Low-Rise Gable-Roofed Buildings

NUMERICAL SIMULATION OF WIND LOADS AND WIND FLOW FIELD AROUND A SPHERICAL TALL BUILDING

NUMERICAL SIMULATION OF WIND PRESSURES AND WIND ENVIRONMENT AROUND A COMPLEX-SHAPED HIGH-RISE BUILDING

Wind load shape coefficient study on walls and bents of large high-rise single story factory with openings

Wind Load on Roof Structures and Mechanism of Wind-induced Damage

Numerical Simulation and Analysis of Wind-Induced Internal Pressure on Low-Rise Buildings

Wind-induced Internal Pressure and Roof Response of Sudden Opening Building

Internal Wind Effect for Long-Span Roof Structure with Openings

Influence of Sudden Opening on Static and Dynamic Wind Load for Flat Roof Structures

Study of Wind Loads and Wind Speed Amplifications on High-Rise Building with Opening by Numerical Simulation and Wind Tunnel Test

Wind-Induced Responses and Wind Loads on a Super High-Rise Building with Various Cross-Sections and High Side Ratio—A Case Study

Three‐dimensional Wind Load Effects and Wind‐induced Dynamic Responses of a Tall Building with X‐shape

Research on Interference of Wind Load on Complicated-Structured Buildings

Wind Load on Complicated-Shape Tall Building under Single Building and Double-Tower Conditions

Wind Tunnel Test Study on Wind Load Characteristics for Double-Skin Facade Building with Rectangular Shape

Experimental Technology on Dynamic Wind Loads on a Tall Building

Numerical Simulation of Wind Load on Prefabricated Buildings Using Computational Fluid Dynamics