USB High-Speed Data Acquisition System Based on CH372

Yang Yingping,Shi Cheng,Li Zhenhua,Xu Xiaoying

DOI: https://doi.org/10.3963/j.issn.1007-144X.2006.08.003

2006-01-01

Abstract:A high-speed data acquisition system with CH372,high-speed A/D converter TLC5510,high-speed FIFO and MCU(AT89C51) is designed.Its circuit design,firmware design and the application software design are deeply introduced.It is found that the system is effective and feasible.

What problem does this paper attempt to address?

Design of Data Communication Interface of Data Acquirement System Based on USB

陈章位,赵玉刚

DOI: https://doi.org/10.3321/j.issn:1004-132X.2004.20.014

2004-01-01

Abstract:An interface based on USB is designed for Data Acquirement System with DSP chips. Cypress EZ-USB technology and FPGA technology were used in this interface. This kind of interface can achieve high speed data communication between the Data Acquirement System and the PC in the USB 1.1 protocol, and it can meet the requirements of high speed and real-time requirements.
The Design of USB Data Acquisition System Based on CH371

ZHANG Xiao-guang,XU Bao-guo

DOI: https://doi.org/10.3969/j.issn.1006-7167.2005.06.013

2005-01-01

Abstract:This paper introduced the design of a data acquisition system based on USB which included hardware and software. Due to the CH371 applied in the system, the firmware procedure' program was simplified for carrying out USB message and the time of the system development was shortened. The result shows that it is preferable to meet the demand of data acquisition in lab.
Design of Four-Channel High Precision Data Acquisition System with USB Interface

XUE Feng,LI Bin

DOI: https://doi.org/10.3969/j.issn.1000-3630.2007.05.025

2007-01-01

Abstract:The design of data acquisition system with high speed and high precision,which is based on USB (Universal Serial Bus),is introduced in this paper. A new audio A/D chip AKM5394 is applied to the data acquisition system. Using CPLD,FIFO,USB interface chip and two AKM5394,a four channel data acquisition system with high precision is implemented. The data are also saved and displayed in real time by USB interface on computer. The driving program,which is used for Windows 2000 or Windows XP,and the application program of the system are realized in Visual C++ language,and the firmware codes are programmed in C language. Because of low cost and a high performance,the system with a measuring precision up to 22 bit can be widely used in such fields as measuring control,signal analysis,and so on.
The Design of a Data Acquisition System Based on USB

DAI Hai-feng,FU Cui-yu

DOI: https://doi.org/10.3969/j.issn.1000-0682.2006.04.012

2006-01-01

Abstract:This paper presents the design of a data acquisition system based on the USB interface,which has its rational hardware structure and corresponding software.This system has been put into operation,which has produced a wonderful effect.
Design and Implementation of a High-speed Parallel Data Collection System Based on USB

Zeng Hong,Liu Shijie,Zhang Xiang,Dai Guojun

DOI: https://doi.org/10.3969/j.issn.1671-4598.2007.08.044

2007-01-01

Abstract:The design and implementation of a high-speed parallel data collection system based on USB is introduced.Each of the sam- ple channels consists of A/D and RAM model,several channels compose the multi-channel parallel data acquisition System.Using Xilinx's CPLD as control core,CY7C68013 as USB controller and asynchronous double port RAM as data buffer,combined with A/D model,the op- erations of data collection,data buffer and data transfer are carried out parallel.The hardware and software implementation of the solution is described in detail.The system has the advantage of high speed,real-time,high cost-performance in the experiment.
High-Speed Data Acquisition System Base On Usb

Y Wang,Zm Wu,Bf Zhao

2002-01-01

Abstract:The high-speed data acquisition system based on USB (Universal Serial Bus) includes a computer loaded testing platform software, A/D converter, micro-controller and communication interface of USB, and can rapidly and accurately transmit data collected. In circuit design except analogue circuit, memory and microprocessor, nearly all-logical circuit can be realized by PLD (Programmable Logic Device), which improve the system integration, and transform the design of hardware into design of software, and increase the speed of exploitation and reliability of system.
A Dual-Channel High-Speed Data-Acquisition System Based on USB2.0 Technique

YUE YUEPING,HUO YUJING,HE SHUFANG

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.19.042

2007-01-01

Abstract:A high- speed dual- channel Data- Acquisition System based on the CY7C68013 and MAX1195 is discussed in the paper. In the design, the FX2’s feature, the GPIF, which can totally remove the bottleneck caused by the 8051’s CPU, is used to achieve the maximum USB2.0 performance. No other microprocessor or CPLD or FPGA is needed. The paper has discussed both the hard- ware design and the software design of the system in great detail, including the firmware of the CY7C68013 and the user application program of the computer side. The system has been tested with a laser longitudinal mode analyzer experiment which proved the de- sign had achieved its original goals.
Design on High Precision, Multi-channel Data Acquisition System with AD7738

DU Bing-tuan,LI Bin

DOI: https://doi.org/10.3969/j.issn.1002-8684.2007.07.015

2007-01-01

Abstract:A high-precision data acquisition system based on AD7738 is introduced in this paper. C8051F320 microcontroller and high-speed transistor optocoupler are used to develop high-precision data acquisition system and to communicate with computer by USB interface. The experimental results show that when the conversion rate is 1 kHz/s, the measured precision is up to 19 bit.
Designs of the High-speed Data Acquisition System Based on USB and I2S Bus

LI Long-yu,FENG Zhi-hua,LIU Zhi-gang,ZHANG Chang-hui

DOI: https://doi.org/10.3969/j.issn.1001-2257.2005.05.016

2005-01-01

Abstract:This paper addresses a frame of highspeed data acquisition system which based on USB and I~2S bus.The using of highspeed data acquisition chip AD7862 and CPLD(complex programmable logic device) make the system adjustable.This method may be a good way for the D/A、DI/DO etc.
A Novel Research of USB Data Acquisition System

ZHANG Huaiqiang,ZHOU Jianbin,PAN Shibin,HE Weimin

2007-01-01

Abstract:This paper describes how to realize a real-time data acquisition system based on powerful MCU C8051F020,and its design of hardware and software.The original signal will be amplified by a internal unit PGA(programmable control amplifier), and than will be processed by the 100 ksps successive close ADC.The final data will be transmitted to a PC through a bridge CP2101 which can pass data form UART to USB interface.In order to display and analyze the signal and the USB supplies power to the system.Finally,the system uses ADC to acquire signal which is from temperature sensor,for the sake of substantiating the reliability and stability of the system.
A data acquisition system based on usb2.0

Dai Guan-zhong

2005-01-01

Abstract:A data acquisition system based on USB2.0 is this paper, including the designing of hardware, firmware, drivers and application programs is presended. This system can realize analog signal sampling in 8 channels simultaneously and the input and output of switching signal in 16 binary channels. The USB interface control chip adopted is CY7C68013, a product of the Company of Cypress. Through designing the control logic of its GPIF interface, sampling and transmiting with high speed have been realized.
Design of the High Speed Real-time Data Acquisition System Based on USB 2.0

WANG Ping,SU Tao,FANG Haojun

DOI: https://doi.org/10.3969/j.issn.1004-373x.2007.01.029

2007-01-01

Abstract:To collect data and send the processed data to the PC in high speed,we design a high speed real-time data acquisition system based on USB 2.0.The paper introduces the hardware design of the system,the emphasis introduces the design of the firmware,driver and application program of the ISP1581.The system could complete data acquisition,processing and transmission very well,which is proved on a high speed DSP platform.
Design of USB Data Acquisition System Based on SCM

李博,祖静

2008-01-01

Abstract:This paper describes how to realize a real-time data acquisition system based on C8051F020, and its design of hardware and software. The technical characteristic of the C8051F020 single chip machine and the ch375 USB chip is given. The original signal will be amplified by a internal unit programmable control amplifier, the C8051F020 single chipmachine is used as the processor, and it can achieve the writing and reading of the storage medium, such as a USB flash drive, through the control ofCH375 USB chip, the program designing is also realized in this paper.
High-speed Data Acquisition System Based on FT2232H

Wang Shu,Xiang Xinyi,Lin Peiqun,Xu Jianmin

2013-01-01

Abstract:Aiming at the requirements of transmission speed and development difficulty of various virtual instruments,an acquisition system on basis of new USB2.0high-speed interface is designed.In order to transmit data quickly among high-speed interfaces,this system employs the interface chip FT2232Hof FTDI Company's fifth generation USB2.0,using its asynchronous FIFO interface to transmit data to FSMC interface of STM32F103,and applies LabVIEW to design PC interface as well as making use of the available Dynamic Link Library(DLL)and Firmware Library MCU to achieve high-speed data transmission.
Linear CCD data acquisition system based on USB

Zhou Kun,Wang Qingyou,Luo Tao

DOI: https://doi.org/10.3969/j.issn.1002-7300.2006.03.036

2006-01-01

Abstract:Design and implementation of linear CCD data acquisition system, which is based on USB interface is introduced in this paper. The A/D transformation and two-valued data acquisition circuits of this system are designed with CPLD. The design of USB bus interface is realized with USB microcontroller CY7C68013. The experiment indicates that the system can meet the requirements of acquisition and fast processing of signals, and can be introduced to measurement system using linear CCD widely.
Based on CH375 Transmit Data to USB

WEI Jing-bin,LIU Jun-feng,QIAN Ji,CHEN Qi-lin

DOI: https://doi.org/10.3969/j.issn.2095-6835.2010.02.063

2010-01-01

Abstract:In this article, a lot of monitoring, measurement and control systems can not be easy to transfer data to mobile devices. Here introduced a USB interface chip QinHeng CH375 and MCS51 MCU as the core, U disk and mobile hard disk storage medium as the data storage programs. The module gives the hardware circuit design and U disk reading and writing program, and points out the error-prone debugging details. The result of the experiment shows that this method with low cost, high reliability, high universality, can be easily integrated into a variety of monitoring, measurement and control system.
The design of high-speed acquisition system based on C8051F061

LUO CHAO,ZHANG WENDONG,YANG WEI

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.02.058

2009-01-01

Abstract:This paper introduces C8051F061's function, capability and peculiarity briefly, and then illuminates the hardware design of multichannel high-speed acquisition system that composed of C8051F061.The kind of data acquisition system can be widely used in sensor signal acquiring and aptitude instruments, which has a very good marker application foreground.
FPGA High-Speed Data Acquisition System Based on USB Communication

LIU Ji,YANG De-wei,WEN Huai-tao,LIU Chao

DOI: https://doi.org/10.3969/j.issn.1004-373x.2011.10.058

2011-01-01

Abstract:A FPGA high-speed data acquisition system based on USB communication is designed to solve the problems of high-speed data acquisition and transmission.The system takes FPGA as a controlling core to implement three functions of A/D control,data buffering dual-port RAM and CY7C68013A control.The programme is compiled with Verilog HDL language and ISE software to control multi-AD7356 to acquire data,store the acquired data in dual-port RAM,and control CY7C68013A to upload data to PC via USB.The experiment testifies that the system works well when CY7C68013A's transmission velocity is set as 16.7 Mb/s.
The design and implementation of a synchronous acquisition and processing system based on FPGA

XU Hui

2009-01-01

Abstract:The paper describes a data acquisition system using EP1K50 serials FPGA, AD7656 A/D coveter and NAND Flash. The system achieves acquiring analog signals with the throughput rate up to 250 kS/s and the precision 16 bits and also storing data which transfers through PC104 bus to the host. The design scheme of the data acquisition system based on FPGA 、 flowchart, as well as the realization of steps key module are presented.
A High-speed Isolated Data Acquisition System

陈芳,王毅,鄢素云

DOI: https://doi.org/10.3969/j.issn.1004-373x.2003.15.024

2003-01-01

Abstract:This paper introduced actualities of data acquisition technology.According to the demand of high speed isolated da- ta acquisition system,the method of data acquiring,recording and transferring and the plan of the circuitwith EZ USB microcon- troller and CPL D are is elaborated.

USB High-Speed Data Acquisition System Based on CH372

Design of Data Communication Interface of Data Acquirement System Based on USB

The Design of USB Data Acquisition System Based on CH371

Design of Four-Channel High Precision Data Acquisition System with USB Interface

The Design of a Data Acquisition System Based on USB

Design and Implementation of a High-speed Parallel Data Collection System Based on USB

High-Speed Data Acquisition System Base On Usb

A Dual-Channel High-Speed Data-Acquisition System Based on USB2.0 Technique

Design on High Precision, Multi-channel Data Acquisition System with AD7738

Designs of the High-speed Data Acquisition System Based on USB and I2S Bus

A Novel Research of USB Data Acquisition System

A data acquisition system based on usb2.0

Design of the High Speed Real-time Data Acquisition System Based on USB 2.0

Design of USB Data Acquisition System Based on SCM

High-speed Data Acquisition System Based on FT2232H

Linear CCD data acquisition system based on USB

Based on CH375 Transmit Data to USB

The design of high-speed acquisition system based on C8051F061

FPGA High-Speed Data Acquisition System Based on USB Communication

The design and implementation of a synchronous acquisition and processing system based on FPGA

A High-speed Isolated Data Acquisition System